Electrical system and instruments

The Motobatt Pro Lithium MLX4U-HP is a high-performance 12V lithium starting battery built as a direct upgrade path from small-case lead-acid batteries. It weighs around a third of a comparable lead-acid unit yet delivers stronger cranking current, which makes it a popular choice for...

The Alpinestars SMX-6 V2 black boots are designed to offer top-tier performance and protection. They cater specifically to sport riders requiring superior comfort and ergonomics combined with innovative protective features.

The Motobatt Pro Lithium MLX7U-HP is a lightweight lithium starting battery for motorcycles, sitting at around a third of the weight of an equivalent lead-acid unit while delivering stronger cranking current. That combination suits riders chasing weight savings on a race or track bike,...

Quality wiring terminals and hardware. Easy to connect and disconnect.

Specifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a...

The Dynavolt MG52113 is a sealed, factory-activated Nano-Gel motorcycle battery rated at 12V and 21Ah. As a Nano-Gel AGM unit it arrives fully charged and ready to fit — no acid filling or initial conditioning required.Designed for motorcycles and powersports applications that call for...

The BS Battery BSLI-02 is a 12.8V 2Ah (24Wh) LiFePO4 lithium battery built as a direct, lighter replacement for common small-capacity powersports batteries. It delivers 140 CCA for confident starting on motorcycles, scooters, ATVs and other small-capacity machines that would normally run a CTX4L,...

The Yuasa YT12B-BS is a sealed, maintenance-free 12V AGM motorcycle battery supplied as a direct replacement for bikes originally fitted with a YT12B-BS. Yuasa is one of the most widely specified battery brands in motorcycling, and the YT-series maintenance-free range is a straightforward like-for-like...

The TecMate OptiMate Cable O-47 is a purpose-built adapter that bridges the SAE connector found on most OptiMate charger outputs to the proprietary charging connector fitted to Ducati motorcycles produced up to and including 2020 models.It is the straightforward solution for Ducati owners who...

The SSB Powersport VT14B-4 is a 12V V-Spec High Performance AGM (Absorbent Glass Mat) battery engineered as a direct replacement for motorcycles and powersport vehicles that require the YT14B-4 or YT14B-BS battery format.Its sealed AGM construction means no electrolyte maintenance is required, making it...

The RMSTATOR RM10001 is a DVA (direct voltage adapter) — also called a peak reading adapter — that connects to a standard digital multimeter so it can measure the peak voltage produced by powersport charging and ignition systems.Small-engine ignition systems generate electricity with permanent...

The Motobatt MPLXHK-P is a Pro Lithium motorcycle starting battery built for riders who want to shed weight without giving up cranking power. At roughly a third of the weight of a comparable lead-acid battery, it still delivers 200 cranking amps for strong, repeatable...

Replace that old burnt-out or lost relay with WMP range of Flasher Relays available in several different fitting options along with universal fitments in varying voltage shapes and pin styles. A universal fitment enables this relay to be used in several different applications the...

WMP Horns are designed to be more than just a noise-maker; they're your audible safeguard, ensuring you're heard and noticed on the road, enhancing your safety and communication with other drivers. 6V Horn (110db) -66mm diameter

Specifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a...

Specifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long-term cell damage. Their unique terminal design offers far greater versatility, allowing them to fit a...

The Motobatt MBTX12U is a sealed 12V AGM battery built for motorcycles, ATVs and other small-engine powersports machines that are started often and ridden hard. Absorbed Glass Mat construction wraps every plate in fibrous glass matting, which holds the electrolyte in place and cushions...

The Motobatt MB10U is a sealed 12V AGM powersports battery built for motorcycles, ATVs and other small-engine machines that are started often and ridden hard. Absorbed Glass Mat construction wraps every plate in fibrous matting, holding the electrolyte in place and cushioning the plates...

The Motocell Lithium Gold MLG14 is a LiFePO4 (lithium iron phosphate) motorcycle battery rated at 48WH, designed as a direct-fit replacement for riders seeking a modern lithium alternative to conventional lead-acid units.LiFePO4 chemistry offers greater thermal stability and a longer service life than other...

The Dynavolt MG14ZS-C is a sealed, maintenance-free Nano Gel motorcycle battery rated at 12V and 12Ah. It uses absorbed glass mat (AGM) construction with Dynavolt's Nano Gel electrolyte technology, which is designed to deliver reliable starting performance and resist vibration — both common demands...

Vance & Hines Exhaust Valve & Air Filter Bypass Module for Harley-Davidson 2006-2014 The Vance & Hines Exhaust Valve & Air Filter Bypass Module is designed to bypass the factory active exhaust and air box valve systems found on select Harley-Davidson models. Engineered for...

The Optimate O-07 is a battery lead adapter designed to bridge Optimate's proprietary TM connector with the widely used SAE connector format. It allows riders who have an Optimate TM-terminated charge lead permanently fitted to their battery to connect to SAE-compatible chargers or accessories,...

The Arrowhead Electric AEP Starter Relay (part number 6-24054043) is a new aftermarket replacement relay for powersports applications. It supersedes the earlier Arrowhead part number 6-SMU6063, providing a current-production replacement where the original relay has failed or become unavailable.Arrowhead Electric is an established aftermarket...

The Arrowhead SMU6075 is a replacement starter relay solenoid — the heavy-duty switch that carries battery current through to the starter motor when the start button is pressed. Solenoids are a common wear item, and a failing one typically shows up as a single...

SSB Powersport 4-B38-6A 6V Lead Acid Battery - SSB

The Optimate O-77 is a dedicated adapter that connects any SAE-output battery charger or maintainer to the Euro 5 charging port fitted to Ducati motorcycles produced from 2021 onwards.For Ducati owners who already run an SAE-equipped charger, the O-77 provides a direct, plug-and-play solution...

The SSB V-Spec VB14A-A2 is a 12-volt high performance AGM (absorbed glass mat) powersport battery rated at 12Ah with 310 cold cranking amps. It is a direct-fit replacement for a wide range of 14-series batteries, including CB14-A1, CB14-A2, CB14A-A2, CB14-B2, YTX14AH-BS, MBTX14AU and MG14-A2-C.Suited...

The Whites Indicator Switch is a replica 70's style switch perfect for that restoration or custom project. The switch is a simple three position switch with centre off that can be used for indicators or headlight low/high beam. The switch has a chrome plated...

The Trail Tech Temperature Extension Lead provides an additional 1200 mm (48 inches) of cable length to extend the reach of compatible Trail Tech temperature sensors and probes.Designed for riders who need greater flexibility when routing a temperature lead through a chassis, this extension...

Brand new ignition source coil. Features: Highest-grade lamination materials. Highest-grade copper windings, resistant to 200 degrees Celsius. Works with all other OEM parts. All products shipped are tested. Specifications: Big Coil: Between each leg = 323 ohms+/-20% Small Coil: Between each leg = 20...

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured...

The RMSTATOR RMS022-105928 is a CNC-machined aluminium MOSFET voltage regulator/rectifier built as a direct replacement for the original unit on a range of three-phase permanent-magnet charging systems. It suits riders chasing a more durable, cooler-running alternative to OEM diode-style regulators, and mechanics replacing units...

The RMSTATOR RM14016 is a universal connector kit designed for regulator rectifier wiring connections on motorcycles and powersports equipment. It is suited to riders and mechanics undertaking electrical repairs or replacements involving the charging system.RMSTATOR is a specialist manufacturer of powersports electrical components, and...

The RMSTATOR MOSFET regulator/rectifier (part RMS022106222) is a direct replacement charging-system component for the Honda CBR 800 and VFR 800 and the Triumph Daytona 675R. It pairs RMSTATOR's MOSFET circuitry with a machined billet aluminium case, in a bypass configuration that runs the regulator's...

The RMSTATOR RM30326 is a MOSFET voltage regulator/rectifier built as a direct replacement for the original unit on the Harley-Davidson V-Rod 1250, 2008 to 2016. It uses the same plugs and pin layout as the factory part, so it fits in the standard location...

Brand new aftermarket Voltage Regulator Rectifier Direct replacement to your original unit Plug-and-play, direct fit, easy installation No assembly required Higher-grade of electric components The quality exceeds the OEM equipment All products shipped are tested We have even included the opposite connector (main harness...

Brand new aftermarket voltage regulator rectifier. Direct replacement to your original unit. Plug-and-play, direct fit, easy installation. No assembly required. Higher grade of electric components. The quality exceeds the OEM equipment. All products shipped are tested. Dimensions: Width: 100mm Length: 110mm Height: 35mm Fixation...

The Motobatt Pro Lithium MLX20UHD-HP is a LiFePO4 replacement battery from the Motobatt HP Series, built for riders chasing a lighter, higher-cranking alternative to a conventional lead-acid unit. At 1.39 kg with 720 CCA on tap, it is aimed at performance road and track...

The Motobatt Pro Lithium MLX16UHD-HP is a lightweight lithium replacement battery from Motobatt's HP series, built as a direct-fit alternative to conventional lead-acid units in motorcycles, ATVs and other powersports machines. It ships with spacers so it can be packed out to suit a...

A universal 12V two-wire electronic flasher relay from Whites Motorcycle Parts, in a square-bodied format. It is the part to fit when you have converted to LED turn signals and the original thermal flasher can no longer drive them correctly, or when the factory...

Replace that old burnt-out or lost relay with WMP range of Flasher Relays available in several different fitting options along with universal fitments in varying voltage shapes and pin styles. Use this relay if you are running LED turn signals. It will also work...

The RMStator RM05009 is a replacement two-position ignition key switch for assorted Honda motorcycles and ATVs. It is built as a direct replacement for the original unit, so it mounts and wires in the same way without cutting or splicing.It suits riders and workshops...

WMP Horns are designed to be more than just a noise-maker; they're your audible safeguard, ensuring you're heard and noticed on the road, enhancing your safety and communication with other drivers. 12V Horn (110db) -70mm diameter

The Garmin Motorcycle Power Cable is a genuine Garmin replacement and accessory cable designed specifically for the Zumo XT2 and Zumo XT3 motorcycle GPS navigators. It provides a direct, permanent power connection between the GPS unit and the motorcycle's electrical system, allowing the device...

Fuse holders are devices for containing, protecting and mounting fuses. The Whites Screw Type Fuse Holder is an in-line screw-together fuse holder that is compatible with glass tube fuses. The fuse holder includes an internal spring which ensures constant contact with the fuse to...

Part of WMP's comprehensive range electrical hardware.

Part of WMP's comprehensive range electrical hardware.

Part of WMP's comprehensive range electrical hardware.

Part of WMP's comprehensive range electrical hardware.

Part of WMP's comprehensive range electrical hardware.