DYNAVOLT MG14ZS-C BATTERY 12V AGM FA Nano Gel 12Ah

The Dynavolt MG14ZS-C is a sealed, maintenance-free Nano Gel motorcycle battery rated at 12V and 12Ah. It uses absorbed glass mat (AGM) construction with Dynavolt's Nano Gel electrolyte technology, which is designed to deliver reliable starting performance and resist vibration — both common demands in motorcycle applications.

This battery ships Factory Activated (FA), meaning it arrives pre-filled and ready to install with no acid preparation required. It suits riders who want a straightforward, drop-in battery replacement without the handling risks associated with conventional acid-fill units.

• 12V / 12Ah rated capacity
• Nano Gel AGM technology — sealed and maintenance-free
• Factory Activated (FA) — arrives pre-filled and ready to install
• No acid preparation required; no venting or topping up needed
• Vibration-resistant sealed construction suited to motorcycle use

Install the battery as received — being Factory Activated, no acid filling or pre-activation is required before fitting.
Ensure the terminal polarity matches your motorcycle's wiring before connecting; connect positive first, then negative.
Keep terminals clean and free of corrosion; apply a light coat of dielectric grease to prevent oxidation.
If the battery has been in storage, charge it fully with a compatible AGM/Gel-compatible smart charger before first use.
Use only a charger specified as compatible with sealed Gel or AGM batteries; conventional open-mode chargers can damage gel cells.
Do not open, puncture, or attempt to add electrolyte — this is a sealed unit and doing so will void any warranty and create a safety hazard.
When storing the motorcycle for an extended period, connect a maintenance (trickle) charger to prevent deep discharge, which can permanently reduce battery capacity.
Store the battery in a cool, dry location away from heat sources and direct sunlight; avoid temperatures below freezing where possible.
Inspect terminals and casing periodically for cracks, swelling, or corrosion; a swollen casing indicates overcharging and the battery should be replaced.