Brake and control

WMP Brake Master Cylinders provide a good-quality and cost-effective solution when replacing your worn-out OEM unit(s). Fitments are available to suit many popular motorcycles, ATVs and UTVs. Use our Parts Finder/Fitment Guide to ensure suitability for your make, model, and year.  Features: Direct bolt-in...

Say goodbye to hand fatigue, blisters and arm pump. WMP MX Full Waffle Grips offer unparalleled grip, guaranteeing comfort, function and durability in all weather conditions, all year-round. Their 360-degree full-waffle pattern and durable gel-feel surface provide ultimate performance in the most challenging terrain....

Renthal 83150BK Fatbar Street Yamaha Tenere 700 XTZ Handlebar Street Fatbar® Renthal's ® Street Fatbar® are the market leading unbraced handlebar. Featuring a tapered wall profile enables the clamping diameter(1-1/8in/28.6mm) to be larger than the control ends (7/8in /22.2mm). The design of Fatbar reduces...

The EBC MD6287D is an OE replacement rear brake disc for 2001-2005 Husqvarna off-road machines. It is a direct-fit service part, intended to restore standard rear braking performance when the original disc is worn, scored or damaged.It suits riders and workshops servicing motocross, enduro...

The Rizoma Notch front brake fluid reservoir replaces the standard plastic reservoir with a machined billet aluminium unit, finished in anodised Shine Black. Its pared-back, notched profile is designed to tidy up the cockpit and lift the finish of the bar area without drawing...

The Brembo PS11B is a rear brake master cylinder finished in gold, supplied with a side fluid outlet and 40 mm fixing hole centres. It is the type of component chosen by riders replacing a worn or damaged original unit, or building a custom,...

Italjet 50 / 125 / 150 / 180 Peugeot Suzuki

A replacement bolt set for the ZETA Pivot Perch, covering both the FP and CP perch versions. It restores the original fasteners on a perch that has been damaged, stripped or lost hardware, so you can keep running the perch you already have rather...

The Zeta Bar End Plugs are a straightforward alloy accessory designed to cap the open ends of compatible handlebars, eliminating the exposed bore that can pose a hazard in a fall or snag on clothing and bodywork.Constructed from alloy and finished in black, these...

Twin Air Grip Donuts are foam rubber rings designed to fit at the handlebar grip area on off-road and motocross motorcycles. Made from 4mm foam rubber, they provide a simple, effective solution for sealing and protecting the grip interface from dirt, mud, and moisture...

The A1 Powerparts throttle cable is a direct replacement part designed to fit the Honda XR100R (1981–1985) and Honda CT110 (1986–1998). It is suited to trail riders, farm-bike owners, and recreational riders who need a reliable like-for-like cable replacement to restore correct throttle operation.A1...

The Motion Pro 02-0077 is a direct-replacement throttle cable engineered to fit Honda ATC110 three-wheelers from 1983–1985 and Honda ATC125M models from 1984–1985.Designed for riders restoring or maintaining these vintage Honda ATCs, this cable is manufactured by Motion Pro — a specialist in precision...

The A1 Powerparts hand brake cable is a direct replacement for Honda TRX300 ATVs built between 1988 and 1995. Designed as a like-for-like substitute, it is suited to owners undertaking routine maintenance or restoring the braking system on their machine.A1 Powerparts is a specialist...

The Motion Pro throttle cable is a direct-fit replacement for the Honda TRX450R (2004–2007), designed to restore precise throttle response on worn or damaged OEM cables. Motion Pro is a specialist manufacturer of control cables and cable-related components for powersports applications.This cable suits riders...

The All Balls Racing 46-2007 Hot Start Plunger Kit is a replacement rebuild kit for the carburettor hot start circuit on selected KTM, Kawasaki and Suzuki models. The hot start plunger lets a warm engine draw extra air when starting, and a worn or...

The Motion Pro Black Vinyl Throttle Cable is a purpose-built replacement cable for Honda CRF50 and XR50 riders who have fitted high rise handlebars. At four inches longer than the standard cable, it provides the extra routing length needed to keep throttle action smooth...

The SW-Motech centrestand (part number HPS.22.141.10001/B) is a model-specific stand designed for the Ducati Multistrada 1200 and 1200 S built from 2010 to 2014. Finished in black, it lifts the bike upright and level so it can be parked, serviced or stored without relying...

The All Balls Racing Steering Stem Bearing Kit 22-1042 is a direct-replacement bearing kit designed to restore precise steering feel on compatible Suzuki small-displacement motorcycles, including the JR80 and DS series, as well as DR, DRZ and RM models in the 60–100cc range.All Balls...

The All Balls Racing 22-1018 Steering Stem Bearing & Seal Kit is a replacement steering head bearing kit supplied with the bearings and seals needed to service the steering stem on one motorcycle. It is sold under part number 22-1018, also referenced as 30-140-18/32.It...

The All Balls Racing 22-1003 steering stem bearing kit is a replacement steering head bearing kit supplied under a single part number. It is intended for riders and workshops servicing steering head bearings that have become notchy, loose or water-affected, restoring smooth, consistent steering...

The Moto-Master Radial Master Cylinder Brake Light Switch is a hydraulic pressure-actuated switch designed to integrate with radial-style master cylinders, triggering the rear or front brake light as soon as brake pressure is applied.It suits riders running aftermarket or OEM radial master cylinders who...

The All Balls Racing Rack Tie Rod End Kit 21-51-1100 is a replacement steering component kit for the Honda Pioneer 700 side-by-side. It covers one side of the vehicle and can be fitted to either the left or the right rack tie rod end.Worn...

The EBC Brakes FA092R is a replacement motorcycle disc pad set from EBC's FA Series R sintered range. It is supplied as a set and is intended as a direct replacement for the specific bikes and calipers listed against the FA092R part number.Because EBC...

FA100 - Sold as a Set - Refer to catalogue on website for correct vehicle application

EPFA379HH - Sold as a Set - Refer to catalogue on website for correct vehicle application

The All Balls Racing Tie Rod End Kit 51-1085-R is a replacement steering component designed for powersport applications. All Balls Racing is a specialist manufacturer of replacement bearing, seal, and suspension kits for motorcycles, ATVs, and UTVs, with a focus on fitment accuracy and...

The MTX cable range is engineered to meet or exceed OEM cable specifications. The MTX cable range includes throttle, brake, clutch, and speedo cables suited to fit a wide range of motorcycles.MTX cables are constructed with an inner nylon sleeve and a black vinyl...

The MTX Parts MTXC11014 is a replacement throttle cable for Harley-Davidson models, supplied in an oversize length that runs 6 inches longer than standard. It suits riders fitting taller or wider handlebars that need extra cable reach, as well as anyone replacing a stretched,...

A direct-fit replacement throttle cable from MTX Parts, made for the Honda XR80 (1990–2003) and the Honda CRF80F (2004 onwards). It is built to meet or exceed the original equipment cable specification, so it drops straight in where the factory cable was.Suited to riders...

A direct replacement throttle cable from MTX Parts, made to suit the Honda XR50R and CRF50F from 2000 onwards. It is built to meet or exceed the original equipment cable specification, so it fits and functions like the item it replaces.Throttle cables are a...

A quality Steering Head Bearing kit from All Balls. Make your bike handle like new! Features: Upgrade ball-type steering bearings to Heavy-Duty Tapered Bearings Higher torque load and better wear than OEM ball-style steering bearings. Each kit is complete with upper and lower bearing...

If you've broken your mirrors, don't panic. We have you sorted with the range of OEM-styled WMP Mirrors. Sold individually to reduce cost when only requiring replacement of one mirror. Built to meet and exceed OEM specifications, making the WMP Mirrors a practical and...

WMP Brake Master Cylinders provide a good-quality and cost-effective solution when replacing your worn-out OEM unit(s). Fitments are available to suit many popular motorcycles, ATVs and UTVs. Use our Parts Finder/Fitment Guide to ensure suitability for your make, model, and year.  Features: Direct bolt-in...

Featuring a full waffle pattern the Whites XR grips are designed and proven to improve feel, grip and durability. The waffle provides additional grip and durability so you can maintain maximum control of your bike. The perfect replacement for your old and worn out...

The Oxford Sports HotGrips Replacement Right-Hand Grip is a genuine Oxford Products spare part designed to replace a damaged or worn throttle-side grip on an existing Sports HotGrips installation. It is sold as a single grip and requires a compatible Oxford HotGrips controller already...

The WMP Grip Donuts are designed to prevent blisters on the inside of your thumb and index finger while providing additional grip. Prevents blisters on the thumb and index finger.

The Oxford HotGrips Premium Touring are electrically heated handlebar grips that replace your existing grips and keep your hands warm on cold, early-morning and wet rides. They suit riders who want to stay comfortable through winter, extend the riding season, or simply keep feeling...

The Oxford HotGrips® Sports Replacement Left-Hand Grip is a genuine Oxford replacement component for riders who already run the HotGrips Sports heated grip system. It allows a single worn or damaged grip to be replaced without the cost of purchasing a complete new kit.As...

The Oxford Hot Grips V8 Heat Controller Replacement Switch is a genuine Oxford replacement part for riders who need to restore full functionality to their Hot Grips V8 heated grip system after a controller failure or damage.Designed as a direct replacement, this switch allows...

The WMP Grip Donuts are designed to prevent blisters on the inside of your thumb and index finger while providing additional grip. Prevents blisters on the thumb and index finger.

The WMP OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of a race-day disaster. Available in black and OEM silver finish (model dependent). Features: Direct OEM replacement cast levers. Designed...

The WMP OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of a race-day disaster. Available in black and OEM silver finish (model dependent). Features: Direct OEM replacement cast levers. Designed...

The WMP OEM replacement cast clutch perch provides an economical alternative to original levers. The perfect replacement for when your perch has broken or thread stripped. In an OEM long-lever design to improve feel and braking. Features: Direct OEM replacement cast perch. Designed to...

A quality caliper rebuild kit from All Balls. Contains everything needed to rebuild your caliper to like new condition.

The Whites Lever Pivot Pins are a workshop-ready solution for replacing worn or damaged lever pivot hardware on compatible Suzuki and Yamaha motorcycles. Supplied on a 10-piece card, they suit trade and enthusiast mechanics who want a reliable quantity on hand.Whites is a well-established...

The WMP OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of a race-day disaster. Available in black and OEM silver finish (model dependent). Features: Direct OEM replacement cast levers. Designed...

The WMP OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of a race-day disaster. Available in black and OEM silver finish (model dependent). Features: Direct OEM replacement cast levers. Designed...

The All Balls Racing 45-4024 is a direct-replacement rear brake cable designed for ATV applications. All Balls Racing is a specialist manufacturer of replacement drivetrain and control components, and their cables are engineered to restore original braking function on worn or damaged machines.This cable...

The Polisport APT Lever Kit is a purpose-built replacement lever set designed specifically for Beta RR motorcycles. APT — Active Protection Technology is Polisport's engineered system that allows levers to pivot and fold upon impact rather than snap, helping to protect both the lever...

The CPR Universal Folding Enduro Clamp-On Mirror is a pair of mirrors designed for enduro and off-road motorcycle use. The clamp-on mounting system fits standard 7/8" (22mm) handlebars without requiring thread adapters, making fitment straightforward across a wide range of bikes.The folding design allows...