Power and performance

The Quantum Fuel Systems QFHFP382MOBT is a replacement electric fuel pump assembly for VST (vapour separator tank) and outboard EFI fuel systems, supplied as a kit with the tank seal, filter and strainer needed for the job. It is built as a drop-in replacement,...

The Keihin Pilot Jet #38 is a direct-fit replacement slow jet for Keihin FCR-MX flat-slide carburettors, sold in a pack of four. Pilot jets govern fuel delivery at closed to quarter-throttle openings, making them the primary tuning lever for idle quality, low-speed response and...

The All Balls Racing Fuel Tap Repair Kit 60-1081 is a purpose-built rebuild kit for the fuel petcock (fuel tap) on the Kawasaki KFX50 and KFX90, covering model years 2007 through 2023.Designed as a cost-effective alternative to replacing the entire petcock assembly, this kit...

The Vertex Top End Rebuild Kit (V24370B) is engineered to restore the engine of the Yamaha YZ85 to factory-specification performance, covering model years 2019 through 2025. Vertex is an Italian manufacturer with a long-standing reputation for precision-machined piston and engine components used in competitive...

The Vortex Racing V3 Fuel Cap is an aftermarket replacement designed as a direct-fit upgrade for compatible Suzuki motorcycles. Finished in black, it suits riders who want a clean, purpose-built alternative to the standard OEM cap.Vortex Racing is a US-based manufacturer with a long-standing...

The States MX Fuel Hose is a straight-cut, 8mm internal diameter fuel line sold in a 1 metre length, designed for use on motorcycles, dirt bikes, and off-road machines. It is suited to fuel system repairs, replacements, and custom builds where a reliable, correctly...

The Keihin Pilot Jet #40 is a direct-fit replacement slow jet for the Keihin FCR-MX flat-slide carburettor series, widely used across motocross, enduro, and off-road four-stroke motorcycles. Sold as a pack of four, it suits riders who tune their jetting across different altitudes, temperatures,...

The Keihin Pilot Jet #42 is a replacement pilot (slow) jet designed for use in Keihin FCR-MX flat-slide carburettors. Pilot jets govern fuel delivery at idle and low throttle openings, making correct sizing essential for clean off-idle response and reliable starting.Sold as a pack...

The Moto Tassinari VForce3 is a complete replacement reed valve assembly for the 2003-2004 Honda CR125, supplied under part number MT-V311A. It replaces the standard reed valve as a single unit, so the cage, petals and stops all come ready to fit.The VForce3 uses...

The Moto Tassinari VForce3 Reed Valve Kit (part number MT-V306A-M-I) is a model-specific replacement reed valve assembly for the KTM 200 XC-W and 200 EXC two-stroke, covering the 2007 to 2016 model years.It is a direct swap for the standard reed valve unit and...

VForce3 Reed Petal Kit GasGas MC50 Years: 2022-2025 GasGas MC65 Years: 2022-2025 Husqvarna TC50 Years: 2022-2025 Husqvarna TC65 Years: 2022-2025...

The NGK CR7HSA is a resistor-type spark plug designed for small-displacement motorcycles, scooters, and ATVs. This pack of ten suits workshops, fleet operators, and riders who prefer to keep service stock on hand.NGK is a globally recognised manufacturer of ignition components, and the CR7HSA...

The Xpert Moto Gear Shim Refill Kit provides five replacement valve shims in a single 7.48 mm diameter, 1.70 mm thickness specification, designed for valve clearance service on overhead-cam motorcycle engines.Sold as a convenient five-piece refill pack, this kit suits riders and workshops that...

This shim refill kit from Xpert Moto Gear contains five shims sized 13.00mm x 2.90mm, designed to make valve clearance checks and adjustments straightforward when the correct shim thickness is needed to hand.Supplied in a five-piece pack, the kit suits riders and technicians who...

The Xpert Moto Gear Shim Refill Kit provides five replacement valve shims in the 10.00mm diameter by 1.85mm thickness specification, ready for use during scheduled valve clearance services on compatible motorcycles.Keeping a stock of correctly sized shims on hand allows for efficient valve adjustment...

The Fuel Star FS110-0128 is a replacement fuel hose and clamp kit designed to fit a specific range of KTM SX-F and SMR off-road motorcycles produced between 2007 and 2010. It is aimed at riders and mechanics looking to restore the fuel delivery system...

The Arrowhead Electrical Products starter motor solenoid is a direct replacement unit for the Honda TRX250TM, cross-referencing OEM part number 35850-HM8-800. It is suited to owners and mechanics looking to restore reliable starting function with a fitment-correct component.Arrowhead Electrical Products specialises in replacement electrical...

The Vertex W4045 is a model-specific top end gasket set for the 1982-1983 Suzuki RM250. It brings together the gaskets needed to reseal the cylinder head and cylinder area in one kit, so the top end goes back together on fresh sealing surfaces instead...

The Hot Rods Oil Pump Chain (SKU H-HC00041) is a direct-replacement chain for the oil pump drive system in a range of Polaris Ranger and RZR side-by-side vehicles. It is suited to owners and workshops undertaking engine rebuilds or scheduled drivetrain maintenance on Polaris...

The All Balls Fuel Tap Repair Kit (part number 60-1143) is designed to rebuild and restore the fuel tap (petcock) on compatible Kawasaki motorcycles, returning it to correct operating condition without the cost of a full replacement unit.All Balls Racing is a well-regarded aftermarket...

Winderosa Yamaha PW50 90-25 Complete Gasket Kit - Winderosa

The Wiseco B1012 is a replacement top end bearing for two-stroke engines. It sits in the small end of the connecting rod, carrying the piston pin, and is listed as a fit for the KTM 85 SX / 85 SX Big Wheel and Husqvarna...

The Vertex Winderosa Water Pump Rebuild Kit 821317 is a model-specific service kit for refreshing the water pump on selected KTM four-stroke enduro and motocross engines. It is intended for riders and workshops carrying out a scheduled water pump service, or chasing a coolant...

The All Balls Carburetor Mid Body Gasket Kit (SKU 26-10124) is a purpose-built replacement seal set for the mid-body section of the Honda CRF150R and CRF150RB carburetor, covering model years 2007 through 2019.Designed for riders and mechanics carrying out carburetor rebuilds or addressing fuel...

The All Balls Racing FS101-0220 is a fuel tap (petcock) repair kit for the Yamaha XVS650 V-Star Classic 2008-2010 and V-Star Custom 2008-2016. It renews the wearing parts inside the tank-mounted fuel valve so you can restore correct fuel shut-off and flow without buying...

The Whites Powersports Fuel Valve Rebuild Kit is a purpose-matched replacement kit designed to restore the fuel valve on the 2006 KTM 250 XCF-W to correct working order. It addresses the common wear and degradation of fuel valve components that occurs over time with...

The Fuel Star Fuel Valve Kit (FS101-0052) is a direct-replacement petcock kit designed specifically for the Yamaha Kodiak 400 ATV produced between 2000 and 2002. It is suited to owners looking to restore correct fuel flow from the tank to the carburettor on these...

The All Balls Racing Fuel Pump Kit 47-2078 is a replacement fuel pump kit for riders and workshops repairing a failed or tired fuel delivery system. All Balls Racing is known for repair and replacement components across powersports machines, supplying them as application-specific kits...

The All Balls Racing Fuel Pump Kit (part number 47-2016) is a replacement fuel pump kit designed for compatible Ducati motorcycles. All Balls Racing is a well-regarded aftermarket powersports parts manufacturer producing replacement components for motorcycles, ATVs, and other powersports vehicles.This kit suits riders...

The All Balls Racing Fuel Pump Kit (part number 47-2007) is an aftermarket replacement kit designed to restore fuel delivery on Honda Goldwing and ST1100 motorcycles. It is suited to riders and workshop technicians carrying out a fuel pump service or repair on these...

The All Balls Racing Complete Carburetor Rebuild Kit (SKU 26-1380) is a direct-replacement internal service kit designed to restore correct fuel delivery to the Yamaha YFM400 Kodiak ATV. It covers the 2WD Kodiak 400 (2003–2004) and the 4WD Kodiak 400 (2003–2006).All Balls Racing engineers...

The All Balls Racing Complete Carburettor Rebuild Kit (part number 26-1298) is designed to restore the carburettor on Yamaha TTR250 models manufactured between 1999 and 2011. It gives owners and mechanics a single-purchase solution for a full carburettor overhaul, supplying the internal wear and...

A complete carburettor rebuild kit from All Balls Racing, part number 26-1141, matched specifically to the 2007 Honda CRF250R. It brings the consumable service parts for a carburettor overhaul together in one model-specific kit, so there is no cross-referencing individual part numbers or piecing...

The All Balls Racing Carburetor Rebuild Kit (part 26-10156) is a direct-fit service kit for the Yamaha YFZ50 youth ATV covering model years 2017 to 2023. It provides the components needed to restore a worn or fuel-varnished carburettor to factory-correct operation without hunting down...

The Vertex V-22444C is a top end rebuild kit designed specifically for the Suzuki RM80 (1991–1999), supplied in a 46.47mm bore size. Vertex is an Italian manufacturer with a long track record supplying OEM-quality and performance-grade pistons to both professional race teams and everyday...

The Vertex Top End Gasket Set is an application-specific replacement kit containing the gaskets required for a top end engine rebuild on the 2019 Kawasaki KX450F. Vertex is a specialist Italian manufacturer with a long-standing background supplying gasket kits and pistons to motocross and...

Winderosa Honda XR250R 96-05 Complete Gasket Kit - Winderosa

The Vertex Top End Gasket Set (W6913 / W6903) is a model-specific replacement gasket kit engineered for the top end rebuild of the KTM 450 SX-F and 450 XC-F (2013–2015) and the Husqvarna FC 450 (2014–2015). It is suited to riders and mechanics carrying...

The Vertex Top End Gasket Set provides the sealing components required for a top end rebuild on the KTM 450 SX-F Factory Edition (2015), KTM SX-F 450 (2016), and KTM XC-F 450 (2016). Vertex is a specialist manufacturer of pistons, gaskets, and engine sealing...

The Hot Rods CBK0187 is a complete bottom end rebuild kit put together for the KTM 85 SX and 85 BW (2013–2016) and the Husqvarna TC 85 and TC 85 BW (2014–2016). Rather than sourcing lower-end components separately, you order one part number matched...

The Motion Pro Vacuum Adapter is a small brass fitting designed for use with vacuum gauge sets during carburettor synchronisation and vacuum port testing on motorcycles. It installs into a 5mm vacuum port and includes a cap to seal the port when gauges are...

The Vertex Water Pump Rebuild Kit is a purpose-made replacement kit designed to restore the cooling system pump on select KTM EXC and EXC-R enduro models from 2008 to 2011. Vertex is an Italian manufacturer with a long-standing reputation for precision engine and drivetrain...

The Vertex Water Pump Rebuild Kit is designed to restore cooling system integrity on compatible KTM and Husqvarna small-bore two-stroke models. It covers the KTM SX 85 (2003–2016), KTM SX 105 (2006–2011), and Husqvarna TC 85 (2014–2015), making it a straightforward solution for addressing...

The Kustom Hardware Can-Am Outlander / Renegade Radiator is a direct-fit replacement cooling unit designed for Can-Am Outlander and Renegade ATV models. It is supplied as a genuine replacement referencing OEM part number 709200286, making it a straightforward like-for-like swap for the factory unit.Suited...

The WMP Starter Solenoid is a high-quality replacement for Honda applications, delivering high cranking power for reliable starting performance. Designed as an affordable alternative to OEM parts, it offers quick and easy installation.Features: Affordable alternative to OEM parts. Meets and exceeds OEM specifications. Quick...

The J&N 240-54037 is a replacement starter solenoid designed to restore reliable electrical switching in compatible powersports and motorcycle applications. J&N is a recognised aftermarket brand supplying quality electrical replacement components including solenoids, starter motors and alternators to the powersports industry.This unit is also...

The J&N Starter Motor (part number 410-54054) is a replacement starter motor sourced from J&N Electrical Products, a manufacturer specialising in replacement electrical components for powersports and small-engine applications.Identified by part number 410-54054 and cross-reference AHSMU0080, this unit is suited to riders and technicians...