Gear advice for your next ride
Subscribe to XPERT Moto Gear emails for practical riding advice, product ideas and workshop updates. Unsubscribe anytime.
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Call us at: 0433 880 748
Free shipping over $200 (excludes tyres and bulky items)
Need help? book@xpertmotogear.com.au
The X-Tech Off-Road Mirror is a black mirror for off-road and dual-sport machines, supplied with the mounting hardware needed for 10mm mirror threads.
It suits riders replacing a damaged or missing mirror on a trail, enduro or adventure bike, or fitting mirrors to a bike being registered for road use. The included hardware covers both left-hand and right-hand mirror threads, so the mirror can be fitted to either side of the handlebar controls.
- Off-road style mirror in black
- Suits 10mm mirror threads
- Supplied with mounting hardware for both left-hand and right-hand mirror threads
- Off-road mirror
- Mounting hardware for 10mm left-hand and right-hand mirror threads
| Brand | X-Tech |
|---|---|
| Type | Off-road motorcycle mirror |
| Thread size | 10mm |
| Thread compatibility | Hardware included for left-hand and right-hand mirror threads |
| Colourway | Black |
| SKU | XTMA302 |
| Barcode | 9342223085183 |
- Confirm your bike uses a 10mm mirror thread before fitting, and check whether the mount is left-hand (reverse) or right-hand threaded.
- Select the matching adaptor from the supplied hardware and start it by hand to avoid cross-threading the mirror mount.
- Tighten the mirror and locknut firmly but without over-torquing, then set the mirror position with the bike upright and the rider seated.
- Re-check tightness after the first ride and periodically afterwards, as vibration and trail impacts can loosen the mount.
- Clean the mirror glass with a soft damp cloth and mild detergent; avoid solvents, fuel and abrasive pads, which can damage the finish and reflective surface.
- Dry the mirror after riding in wet or muddy conditions, and apply a light coating of grease to the threads on reassembly to prevent seizing.
- Fold or remove the mirror before transporting the bike in a trailer or ute to protect the stem from knocks.
- Replace the mirror if the glass is cracked or the stem is bent, as a distorted view or loose mount compromises safety.
- Choosing a selection results in a full page refresh.