Fuel your savings with exclusive deals.
Rev up your inbox with weekly deals, clearance steals, and promo codes.
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Call us at: 0433 880 748
Free shipping over $200 (excludes tyres and bulky items)
Need help? book@xpertmotogear.com.au
Explore related collections:
- ➔ Other vehicle tyres (1092 products)
- ➔ Tyres by vehicle types (982 products)
- ➔ ATV tyres (306 products)
- ➔ Wanda (217 products)
The Wanda P306 is an all-terrain tyre for quad bikes and ATVs running 9-inch rims. Its directional tread is cut with deep, widely spaced blocks that bite into loose surfaces and clear mud and debris as the wheel turns.
Riders report consistent, predictable grip both under acceleration and on the brakes, which makes it a straightforward choice for farm work, trail riding and general property use. The 6-ply rating and tubeless construction suit the knocks and stubble of everyday off-road running.
- Directional tread pattern for consistent forward drive and self-cleaning
- Aggressive block design for traction on loose and uneven terrain
- Predictable grip under both acceleration and braking
- 6-ply rating (6PR) construction
- Tubeless (TL) — no inner tube required on a suitable rim
- 25x12-9 sizing: 25 in overall diameter, 12 in section width, fits 9 in rims
- One ATV tyre (sold individually)
| Brand | Wanda |
|---|---|
| Model | P306 |
| Type | ATV / quad bike all-terrain tyre |
| Size | AT 25x12-9 (25 in overall diameter, 12 in section width, 9 in rim diameter) |
| Ply rating | 6PR |
| Construction | Tubeless (TL) |
| Tread | Directional, aggressive block pattern |
| Sold as | Single tyre |
- Have the tyre fitted and balanced by a qualified tyre technician using proper machinery — ATV tyres are stiff and can be damaged by levering onto the rim incorrectly.
- This is a directional tyre: check the rotation arrow moulded into the sidewall and fit it so the tread rotates the correct way for the wheel it is going on.
- Being tubeless, it needs an undamaged, clean, rust-free rim and a serviceable valve to seal properly; fit a new valve at the same time as the tyre where practical.
- Inflate to the pressure specified by your ATV manufacturer for the intended load, and never exceed the maximum pressure marked on the sidewall — over-inflation to seat the bead should only be done in a safety cage by a professional.
- Check pressures cold (before riding) and adjust regularly; low-pressure ATV tyres lose pressure faster than road tyres and running them soft risks the bead unseating in turns.
- After fitting, re-check wheel nut torque after the first ride and periodically thereafter.
- Inspect regularly for cuts, stubble punctures, embedded stones and sidewall damage, particularly after paddock and scrub work.
- Replace the tyre when the tread is worn down to the wear indicators, or sooner if the carcass or sidewall is damaged.
- Clean with water and mild detergent only; keep petrol, oils and solvents off the rubber.
- Store spare tyres upright in a cool, dry place away from direct sunlight, electric motors and ozone sources.
- Avoid extended sealed-road use where possible — hard surfaces wear knobbly ATV tread quickly and reduce grip off-road.
- Choosing a selection results in a full page refresh.