Fuel your savings with exclusive deals.
Rev up your inbox with weekly deals, clearance steals, and promo codes.
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Call us at: 0433 880 748
Free shipping over $200 (excludes tyres and bulky items)
Need help? book@xpertmotogear.com.au
Explore related collections:
- ➔ Other vehicle tyres (1092 products)
- ➔ Tyres by vehicle types (982 products)
- ➔ ATV tyres (306 products)
- ➔ Wanda (217 products)
The Wanda P341 is a front-size ATV tyre in AT22x7-11, built with a directional "V" angled tread for quad bikes, sports ATVs and utility quads used on dirt, gravel and mixed loose surfaces.
Wide gaps between the tread blocks let the tyre shed mud and loose material as it rotates, so the edges keep biting under acceleration and braking rather than packing up and going slick. The 6 ply rating gives it the carcass strength expected of a working ATV tyre, and the tubeless construction suits standard 11-inch ATV rims.
Sold as a single tyre.
- Directional "V" angled tread pattern
- Wide tread block spacing for self-cleaning in mud and loose dirt
- Tread design aimed at traction under both acceleration and braking
- 6 ply rating (6PR) carcass
- Tubeless (TL) construction
- AT22x7-11 size — 22-inch overall diameter, 7-inch section width, 11-inch rim
- Load and speed marking 32F
| Brand | Wanda |
|---|---|
| Model | P341 |
| Type | ATV / quad bike tyre |
| Size | AT22x7-11 |
| Overall diameter | 22 in |
| Section width | 7 in |
| Rim diameter | 11 in |
| Ply rating | 6PR |
| Construction | Tubeless (TL) |
| Load index / speed symbol | 32F |
| Tread pattern | Directional "V" angled tread with wide gaps between blocks |
| Sold as | Single tyre |
- Fit the tyre to a rim of the correct 11-inch diameter and rated width, and have fitting and balancing done by a qualified tyre technician — tubeless ATV tyres need the correct bead seating to hold air.
- Observe the directional tread: mount the tyre so the "V" points in the intended direction of rotation for the wheel it is fitted to.
- Set cold inflation pressure to the pressure specified on the tyre sidewall and in your ATV owner's manual, and never exceed the maximum pressure marked on the sidewall.
- Check pressures cold before each ride; ATV tyres run at low pressures where a small loss makes a large difference to handling and bead retention.
- After fitting, take it easy for the first ride or two to let the tyre settle and to confirm the bead is seated evenly and holding pressure.
- Hose off mud and grit after riding and let the tyre dry — dried mud packed in the tread reduces the self-cleaning action the pattern relies on.
- Inspect regularly for cuts, punctures, embedded stones, sidewall damage and uneven wear, and replace the tyre once the tread blocks are worn down or any cord is exposed.
- Do not use petrol, solvents or tyre dressings containing harsh chemicals on the sidewalls; they can degrade the rubber.
- Store spare tyres upright in a cool, dry place out of direct sunlight and away from electric motors or other sources of ozone.
- Do not exceed the load and speed limits indicated by the 32F marking, and do not fit this tyre to a vehicle it is not intended for.
- Choosing a selection results in a full page refresh.