Gear advice for your next ride
Subscribe to XPERT Moto Gear emails for practical riding advice, product ideas and workshop updates. Unsubscribe anytime.
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Call us at: 0433 880 748
Free shipping over $200 (excludes tyres and bulky items)
Need help? book@xpertmotogear.com.au
Explore related collections:
- ➔ Other vehicle tyres (1092 products)
- ➔ Tyres by vehicle types (982 products)
The Wanda P306 is an all-terrain ATV tyre in the AT22x11-10 size, built to a 6-ply rating and designed for tubeless fitment on a 10-inch rim.
Its directional, aggressively spaced tread is shaped to bite into loose surfaces, delivering steady grip under acceleration and braking so the machine behaves predictably rather than breaking away without warning. It suits quad and ATV riders after a straightforward, workmanlike replacement tyre for farm, trail and general recreational use.
Sold individually, so you can replace a single tyre or order a matched set.
- Directional tread pattern for consistent grip in one rolling direction
- Aggressive, open tread design for traction on loose and uneven ground
- Predictable traction under both acceleration and braking
- 6-ply rating (6PR) construction
- Tubeless (TL) design
- AT22x11-10 sizing: 22-inch overall diameter, 11-inch section width, 10-inch rim
- One Wanda P306 ATV tyre (sold individually)
| Brand | Wanda |
|---|---|
| Model | P306 |
| Type | ATV / quad all-terrain tyre |
| Size | AT22x11-10 |
| Overall diameter | 22 inches (nominal) |
| Section width | 11 inches (nominal) |
| Rim diameter | 10 inches |
| Ply rating | 6PR |
| Construction | Tubeless (TL) |
| Tread pattern | Directional |
| Sold as | Single tyre |
- Have the tyre fitted and balanced by a qualified tyre technician using correct beading equipment — ATV tyres are low-pressure and easily damaged by improper fitment.
- Because the tread is directional, mount the tyre so the pattern rotates in the direction indicated by the arrow moulded on the sidewall; fitting it backwards reduces traction and self-cleaning.
- As a tubeless tyre, it must be fitted to a rim in sound condition with an undamaged bead seat and a serviceable valve; replace the valve at the same time as the tyre.
- Check cold inflation pressure before every ride and set it to the pressure specified by your ATV manufacturer for this tyre size — never exceed the maximum pressure moulded on the sidewall, and do not run it under-inflated.
- After fitting, re-check pressures after the first ride or two, as newly seated tyres can settle.
- Inspect regularly for cuts, punctures, embedded stones, bulges, sidewall damage and uneven wear, and replace the tyre if the tread is worn out or the carcass is damaged.
- Clean with water and mild detergent to clear packed mud from the tread blocks; avoid petrol, solvents and tyre dressings containing silicone, which can degrade the rubber.
- Store spare tyres upright in a cool, dry place out of direct sunlight and away from electric motors, ozone sources, fuels and oils.
- Avoid prolonged sealed-road use, harsh kerb strikes and spinning on hard surfaces, all of which accelerate wear on an all-terrain tread.
- Choosing a selection results in a full page refresh.