Fuel your savings with exclusive deals.
Rev up your inbox with weekly deals, clearance steals, and promo codes.
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Call us at: 0433 880 748
Free shipping over $200 (excludes tyres and bulky items)
Need help? book@xpertmotogear.com.au
Explore related collections:
- ➔ Other vehicle tyres (1092 products)
- ➔ Tyres by vehicle types (982 products)
- ➔ ATV tyres (306 products)
- ➔ Wanda (217 products)
The Wanda P341 is a replacement tyre for quad bikes and ATVs running 9-inch rims. It is built for unsealed going — paddock work, farm tracks, trails and loose or soft ground — where drive and braking bite matter more than sealed-road manners.
The aggressive directional block tread is the defining feature: the angled "V" layout puts biting edges to work under acceleration and braking, while the generous spacing between blocks lets mud and loose material clear itself rather than pack in. It suits owners replacing worn rubber on utility, farm and recreational quads who want a straightforward, hard-wearing off-road tyre.
Sold individually. Please check the size marked on your existing tyre and your rim diameter before ordering.
- Directional "V" angled tread pattern for traction under acceleration and braking
- Wide gaps between tread blocks promote a self-cleaning action in mud and loose ground
- 6 ply rating (6PR) casing
- Tubeless (TL) construction
- AT22x10-9 sizing to suit 9-inch ATV rims
- 45F load and speed rating
- 1 x Wanda P341 ATV tyre (sold individually)
| Brand | Wanda |
|---|---|
| Model | P341 |
| Type | ATV / quad bike tyre |
| Size | AT22x10-9 |
| Nominal overall diameter | 22 in |
| Nominal section width | 10 in |
| Rim diameter | 9 in |
| Ply rating | 6PR (6 ply rating) |
| Construction | Tubeless (TL) |
| Load / speed rating | 45F |
| Tread pattern | Directional "V" angled block tread with wide inter-block gaps |
| Sold as | Single tyre |
- Have the tyre fitted and balanced by a qualified tyre fitter using the correct machine and bead lubricant — levering an ATV tyre on by hand risks bead and casing damage.
- The tread is directional, so fit the tyre with the "V" pointing the correct way for the wheel's direction of travel; check the rotation marking on the sidewall before it is seated.
- Do not exceed the maximum inflation pressure moulded on the sidewall, and take care when seating the beads — over-inflating to seat a bead can burst the tyre.
- Set and check cold inflation pressure to your ATV manufacturer's recommendation before riding; under-inflation on ATV rims can allow the bead to unseat during hard cornering.
- Ride moderately for the first outing to let any mould-release residue wear off the new tread.
- Re-torque the wheel nuts to the vehicle manufacturer's specification after fitting, then re-check them after the first ride.
- Inspect regularly for cuts, embedded stones, sidewall damage and uneven wear; replace the tyre if the casing is damaged or the tread is worn out.
- Clean with mild soap and water only — avoid solvents, fuel and petroleum-based tyre dressings, which can degrade the rubber.
- Store spare tyres upright in a cool, dry place out of direct sunlight and away from ozone sources such as electric motors, batteries and chemicals.
- Stay within the tyre's 45F load and speed rating; this is an off-road ATV tyre, so check your state's rules before using the vehicle on any public road.
- Choosing a selection results in a full page refresh.