Fuel your savings with exclusive deals.
Rev up your inbox with weekly deals, clearance steals, and promo codes.
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Call us at: 0433 880 748
Free shipping over $200 (excludes tyres and bulky items)
Need help? book@xpertmotogear.com.au
Explore related collections:
- ➔ Motorcycle tyres (1069 products)
- ➔ Medium compound motorcycle tyres (812 products)
- ➔ All weather motorcycle tyres (795 products)
- ➔ Rear motorcycle tyres (618 products)
- ➔ Off-Road motorcycle tyres (316 products)
- ➔ Wanda (217 products)
The Wanda P2001 is a knobby off-road motorcycle tyre in the 4.60-17 size with a 6-ply rating, sized for a 17-inch rim. It suits trail, dirt and enduro-style machines running a rear 4.60-17 fitment.
The aggressive block tread pattern is designed for loose and unsealed surfaces, while the 6PR construction is intended for riders who want additional carcass strength for rougher terrain. Sold as a single tyre.
- Knobby off-road tread pattern for loose and unsealed surfaces
- 4.60-17 size for 17-inch rims
- 6 ply rating (6PR) construction
- Tube-type fitment sizing convention (4.60-17)
- Sold as a single tyre
| Brand | Wanda |
|---|---|
| Model | P2001 |
| Type | Knobby off-road motorcycle tyre |
| Size | 4.60-17 |
| Rim diameter | 17 inch |
| Ply rating | 6PR |
| Sold as | Single tyre |
| SKU | KG1045W |
- Have the tyre fitted and balanced by a qualified motorcycle tyre technician using correct bead lubricant and rim protection.
- Use the tube size and type specified for a 4.60-17 fitment, and fit a fresh tube and rim tape rather than reusing damaged ones.
- Set and check cold inflation pressures to the motorcycle manufacturer's recommendation for the intended surface and load; check before every ride.
- Ride moderately for the first heat cycles to allow the release agent to wear off the tread and the carcass to settle.
- Check rim lock and valve stem alignment regularly — a leaning valve stem indicates the tyre has slipped on the rim and needs re-seating.
- Inspect knobs, sidewalls and bead area for cuts, torn or missing blocks, embedded debris and cracking; replace the tyre if the carcass or bead is damaged.
- Clean with mild soapy water and a soft brush; avoid solvents, petrol and tyre dressings, which can degrade the rubber and reduce grip.
- Store away from direct sunlight, ozone sources such as electric motors, and extremes of heat, standing upright or laid flat rather than hanging under load.
- Replace once the knobs are worn down, rounded or torn, and observe the tyre's directional and fitment markings on the sidewall when mounting.
- Choosing a selection results in a full page refresh.