Fuel your savings with exclusive deals.
Rev up your inbox with weekly deals, clearance steals, and promo codes.
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Call us at: 0433 880 748
Free shipping over $200 (excludes tyres and bulky items)
Need help? book@xpertmotogear.com.au
Explore related collections:
- ➔ Other vehicle tyres (1092 products)
- ➔ Tyres by vehicle types (982 products)
- ➔ Wanda (217 products)
The Wanda P306 in 22x10.00-10 is a small-wheel tyre built for 10-inch rims, supplied in a tubeless (TL) construction with a 6 ply rating (6PR) casing. The 22x10.00-10 imperial designation is a common rear fitment on quads, ATVs and similar light off-road machines.
It suits riders replacing a worn tyre like-for-like, or anyone building up a spare set of wheels in this size. Sold individually, so order the quantity you need for your machine.
Check your existing tyre sidewall or your machine's handbook to confirm 22x10.00-10 is the correct fitment before ordering, and make sure your rim is rated for tubeless use.
- Tubeless (TL) construction — no inner tube required when fitted to a sealed tubeless rim
- 6 ply rating (6PR) casing
- 22x10.00-10 sizing: 22 in nominal overall diameter, 10.00 in nominal section width
- Fits 10-inch diameter wheels
- Sold individually (single tyre)
- One Wanda P306 22x10.00-10 tyre
| Brand | Wanda |
|---|---|
| Model | P306 |
| Type | Tyre |
| Size | 22x10.00-10 |
| Nominal overall diameter | 22 in |
| Nominal section width | 10.00 in |
| Rim diameter | 10 in |
| Construction | Tubeless (TL) |
| Ply rating | 6PR |
| Sold as | Single tyre |
| SKU | KG5058W |
- Have the tyre fitted and bead-seated by a qualified tyre fitter using proper tyre levers or a machine and tyre-mounting lubricant — never seat beads using flammable aerosols.
- Fit tubeless only to a rim rated and sealed for tubeless use; if the rim is not tubeless-capable, an inner tube of the correct size must be used.
- Stand clear and use a clip-on chuck with an extension hose when inflating to seat the beads, and do not exceed the maximum bead-seating pressure marked on the sidewall.
- Set and check inflation pressure when the tyre is cold, using the pressure specified by your machine's manufacturer and staying within the maximum pressure marked on the sidewall — low-pressure ATV tyres are easily over-inflated with a service-station airline.
- Ride gently for the first outing to let the new tyre scrub in and shed mould release from the tread surface.
- Inspect regularly for cuts, splits, embedded stones or objects, sidewall damage and uneven wear, and replace the tyre once the tread is worn out or the casing is damaged.
- Check the valve and valve core for leaks whenever you adjust pressures, and fit a valve cap to keep dirt out.
- Clean with mild soapy water and a soft brush; avoid solvents, petrol, degreasers and silicone tyre-shine dressings on the tread.
- Store spare tyres upright in a cool, dry, dark place away from direct sunlight, ozone sources such as electric motors and welders, and away from oils, fuels and chemicals.
- Do not overload the machine beyond its rated capacity, and replace tyres in matched pairs where possible so diameters and grip stay even.
- Choosing a selection results in a full page refresh.