Name: Street 2 825-Fuel Matt Carbo BLK/Silver
Brand: RXT
SKU: HRSTR2222
Price: 130.95 AUD
Availability: InStock

The RXT 825 Street 2 'Fuel' is a full face road helmet built on a lightweight ABS shell with a slim, modern profile, finished here in a matt carbon black and silver colourway.

It suits everyday street and commuter riders after a straightforward, well-ventilated full face lid with a removable washable interior and a quick-release visor system. Sizing runs from XS through to 2XL.

Helmets are a personal safety item. Please check the size chart carefully before ordering, as helmets cannot be returned or exchanged unless faulty.

ECE 22.06 approved
Lightweight ABS shell with slim shell shape
Self-tensioning visor with hard-coated, scratch-resistant finish
Quick-release visor with lock button
Pinlock ready visor
'Active Flow' 3-stage ventilation system
Removable and washable soft-feel liner
Removable lower front neck curtain
Removable breath guard
Micrometric quick-release buckle retention system
Rear wing stabiliser
Available in sizes XS to 2XL

Brand	RXT
Model	825 Street 2 'Fuel'
Type	Full face motorcycle helmet
Shell material	Lightweight ABS, slim shell shape
Certification	ECE 22.06 approved
Visor	Self-tensioning, hard-coated and scratch-resistant, quick-release with lock button, Pinlock ready
Ventilation	'Active Flow' 3-stage ventilation system
Liner	Removable and washable soft-feel liner
Retention system	Micrometric quick-release buckle
Aerodynamics	Rear wing stabiliser
Included fittings	Removable lower front neck curtain and removable breath guard
Sizes	XS to 2XL
Colourway	Matt Carbon Black/Silver

Check the fit before each ride: the helmet should sit level and firm with no pressure points, and the micrometric buckle should be adjusted so the strap is snug under the jaw before the ratchet is engaged.
Remove the interior lining and wash it separately by hand in lukewarm water with a mild soap, then air dry it fully away from direct heat or sunlight before refitting.
Wipe the shell and visor with a soft, damp cloth and mild soapy water only. Avoid petrol, solvents, thinners, ammonia-based glass cleaners and abrasive cloths, which can damage the matt finish and the visor's hard coating.
Soften stubborn insects by laying a damp cloth over the visor for a few minutes rather than scrubbing, to protect the scratch-resistant coating.
Use the quick-release visor mechanism to remove the visor for cleaning, and check the lock button engages correctly once refitted.
The visor is Pinlock ready, so a compatible Pinlock insert can be fitted to reduce fogging in cold or wet conditions. Fit it with clean hands and handle the insert by its edges.
Fit or remove the breath guard and lower neck curtain to suit the weather, and adjust the three-stage vents to manage airflow.
If the helmet gets wet, let it dry naturally at room temperature with the liner removed. Do not use a hair dryer, heater or direct sunlight.
Store the helmet in its bag in a cool, dry place, and avoid resting it on mirrors, tank or handlebars where it can fall.
Replace the helmet after any impact or heavy drop, even if no damage is visible. Do not attempt to repair or repaint the shell.
Fitting non-genuine components or accessories may void the manufacturer's warranty.