Fuel your savings with exclusive deals.
Rev up your inbox with weekly deals, clearance steals, and promo codes.
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Call us at: 0433 880 748
Free shipping over $200 (excludes tyres and bulky items)
Need help? book@xpertmotogear.com.au
Explore related collections:
- ➔ Other vehicle tyres (1092 products)
The Maxxis Liberty ML3 is a radial ATV tyre in the 30x10R14 size, carrying an 8-ply rating and an NHS (Not for Highway Service) marking. It suits 14-inch ATV and side-by-side wheels where a taller, wider footprint is wanted over the original equipment fitment.
Radial casing construction is designed to keep the tread flat and settled on the ground, while the 8-ply rating targets the load and abuse of utility and recreational work. As an NHS tyre, it is intended for off-road and off-highway use rather than sealed public roads.
Note: our supplier and competitor listings for this item carry title-level data only. We have limited the specifications below to details that can be confirmed from the product designation. Contact us if you need load index, tread depth or rim width figures confirmed before ordering.
- Radial construction, as denoted by the "R" in the 30x10R14 size code
- 8-ply rating for load-carrying capability
- NHS (Not for Highway Service) marked — intended for off-road and off-highway use
- Sized 30x10R14 to suit 14-inch ATV and side-by-side wheels
- Nominal 30-inch overall diameter with a 10-inch section width
- Part of the Maxxis Liberty ML3 ATV tyre range
| Brand | Maxxis |
|---|---|
| Model | Liberty ML3 |
| Type | ATV / side-by-side tyre |
| Size | 30x10R14 |
| Rim diameter | 14 inch |
| Nominal overall diameter | 30 inch |
| Nominal section width | 10 inch |
| Construction | Radial |
| Ply rating | 8 ply |
| Service marking | NHS (Not for Highway Service) |
| SKU | T67-1430-10 |
- Have the tyre fitted by a qualified technician using a rim of the correct diameter and an approved bead lubricant — never fit to a damaged or corroded wheel.
- Keep well clear of the assembly while seating the bead, and do not exceed the bead-seating pressure marked on the sidewall.
- Set cold inflation pressure to the figure specified by your ATV or side-by-side manufacturer, and never exceed the maximum pressure moulded on the sidewall.
- Check pressures cold, before riding, at least weekly — low pressure is the most common cause of bead unseating and casing damage on ATV tyres.
- This tyre is NHS marked (Not for Highway Service) and is intended for off-road and off-highway use, not sealed public roads.
- Where possible, fit matching tyres across an axle so rolling diameters and tread depths stay even, which matters most on machines with locked or all-wheel-drive drivelines.
- Re-check wheel nut torque to the vehicle manufacturer's specification shortly after fitting, and have the wheels balanced if your machine calls for it.
- Inspect before each ride for cuts, punctures, embedded stones and sidewall damage; retire any tyre with sidewall damage rather than attempting a repair.
- Ride moderately for the first outing after fitting to let the new tread bed in and shed mould release agents.
- Clean with mild soap and water only; avoid solvents, fuels and petroleum-based tyre dressings, and store spare tyres upright in a cool, dry place away from direct sunlight and electric motors.
- Choosing a selection results in a full page refresh.