Fuel your savings with exclusive deals.
Rev up your inbox with weekly deals, clearance steals, and promo codes.
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Call us at: 0433 880 748
Free shipping over $200 (excludes tyres and bulky items)
Need help? book@xpertmotogear.com.au
Explore related collections:
- ➔ Racks and carriers (849 products)
- ➔ Rear racks (430 products)
The Givi 727FZ Monorack Arms are a model-specific rear rack for the Triumph Street Triple 675, giving the bike a proper mounting base for a Givi top case. Because the arms are made for this model, they follow the subframe mounting points rather than relying on a universal bracket, so the case sits square and secure.
The 727FZ is the rack half of the system only. To carry a case you also need a Givi top case plate — a Monokey plate for larger cases or a Monolock plate for the lighter range — which is sold separately and bolts to the arms.
It suits Street Triple riders who want to add a commuter's top box for a helmet and daily gear, or extra carrying capacity for weekend trips, without permanently changing the look of the bike once the case is off.
- Model-specific Givi Monorack Arms rear rack for the Triumph Street Triple 675 (2007-2012)
- Takes a Givi Monokey or Monolock top case once fitted with the matching plate
- Compatible with Monokey M5, M7, M8A, M8B, M9A and M9B plates
- Compatible with the Monolock M5M plate
- Top case plate not included - order the plate to suit your case
- Steel construction
| Brand | Givi |
|---|---|
| Model / Part number | 727FZ |
| Type | Monorack Arms - model-specific rear rack for a Monokey or Monolock top case |
| Fitment | Triumph Street Triple 675 (2007-2012) |
| Compatible Monokey plates | M5, M7, M8A, M8B, M9A, M9B |
| Compatible Monolock plate | M5M |
| Top case plate | Not included - required to mount a case |
| Material | Steel |
- Fit using the Givi instructions supplied with the rack, following the stated bolt positions and hardware for the Street Triple 675.
- The arms alone will not carry a case - fit a Givi Monokey or Monolock plate (sold separately) to the arms before mounting a top case.
- Re-check all mounting bolts after the first ride with a loaded case, then at regular service intervals, as vibration can loosen fasteners over time.
- Stay within the load limits stated by Givi for your top case and plate, and pack heavier items low and forward in the case rather than at the rear.
- Be aware that weight carried high and behind the rear axle changes handling - reduce speed and allow more room when the case is loaded.
- Wash the rack with mild soapy water and rinse thoroughly, particularly after riding in the wet or near the coast; avoid aggressive solvents and don't aim a pressure washer directly at fasteners or mounting points.
- Dry the rack after washing and touch up any paint chips or scratches promptly to keep corrosion out of the steel.
- Keep the plate mounting face and locking hardware clean and free of grit so the case seats and latches correctly.
- Remove the top case when it isn't needed to cut weight and keep the rear of the bike tidy.
- Inspect the arms for cracks, bending or elongated bolt holes after any drop or heavy impact and replace rather than repair damaged parts.
- Choosing a selection results in a full page refresh.