Fuel your savings with exclusive deals.
Rev up your inbox with weekly deals, clearance steals, and promo codes.
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Call us at: 0433 880 748
Free shipping over $200 (excludes tyres and bulky items)
Need help? book@xpertmotogear.com.au
Explore related collections:
- ➔ Other vehicle tyres (1092 products)
- ➔ Tyres by vehicle types (982 products)
- ➔ ATV tyres (306 products)
- ➔ Duro (169 products)
The Duro DI2010 Buffalo is a replacement ATV tyre in 25x11.00-10 — a 25-inch nominal overall diameter with an 11.00-inch nominal section width, made to fit a 10-inch rim. It is built to a 6 ply rating (6PR) and is a tubeless (TL) construction, so no inner tube is required when it is fitted to a suitable tubeless rim.
It suits quad and ATV owners replacing a worn tyre, or anyone rebuilding a set on wheels that take this size. Please check the size and load requirements specified by your vehicle's manufacturer before ordering, as fitment varies between models.
Sold individually, so order the quantity you need for your axle or full set.
- Size 25x11.00-10 — 25 in nominal overall diameter, 11.00 in nominal section width, 10 in rim diameter
- 6 ply rating (6PR) carcass construction
- Tubeless (TL) — no inner tube required on a suitable tubeless rim
- Duro DI2010 Buffalo tread pattern for ATV and quad use
- Sold as a single tyre, so you can order one, a pair or a full set
- One Duro DI2010 Buffalo 25x11.00-10 ATV tyre (sold individually)
| Brand | Duro |
|---|---|
| Model | DI2010 Buffalo |
| Type | ATV / quad tyre |
| Size | 25x11.00-10 |
| Nominal overall diameter | 25 in |
| Nominal section width | 11.00 in |
| Rim diameter | 10 in |
| Ply rating | 6PR (6 ply rating) |
| Tube type | Tubeless (TL) |
| Sold as | Single tyre |
| SKU | KG5071 |
| Barcode | 9342223120792 |
- Have the tyre fitted and balanced by a qualified tyre technician using correct tyre-changing equipment; ATV beads can be damaged by levering with improvised tools.
- Fit only to a rim of the matching 10-inch diameter that is rated for tubeless use, and confirm the size against the tyre placard or owner's manual for your ATV before fitting.
- Check the sidewall for any rotation-direction or fitment markings and orient the tyre accordingly before seating the bead.
- When seating the bead, use a safety cage or restraining device, keep clear of the tyre and do not exceed the bead-seating pressure marked on the sidewall; if the bead has not seated by then, deflate, re-lubricate and try again.
- Set and check inflation pressure to the figure specified by your ATV's manufacturer, and always measure when the tyres are cold. Low pressure causes bead unseating and sidewall damage; over-inflation reduces grip and ride comfort.
- Inspect regularly for cuts, splits, embedded stones or nails, bulges and uneven wear, and check that the valve and valve cap are intact and sealing.
- Replace the tyre once the tread is worn out, or if the carcass or sidewall is cut, punctured through the shoulder, or otherwise damaged.
- Clean with mild soap and water and a soft brush; avoid solvents, petrol and petroleum-based tyre dressings, which can degrade the rubber.
- Ride moderately for the first few kilometres so the new tread surface can scrub in and the tyre can settle on the rim.
- Store spare tyres upright in a cool, dry, dark place away from direct sunlight, ozone sources such as electric motors, and fuels or oils.
- Choosing a selection results in a full page refresh.