Name: Commander 2 White Gloss
Brand: Airoh
SKU: HACOM2023
Price: 653.95 AUD
Availability: InStock

The Airoh Commander 2 is the updated version of Airoh's long-running adventure helmet, here in a gloss white finish. It's built for riders who cover tarmac and dirt in the same day — touring, dual-sport and adventure work — and can be set up in three different configurations so the same helmet suits different riding.

This version uses a Composite Carbon shell moulded in three sizes, so smaller sizes get a smaller shell rather than a thicker liner. Ventilation was developed in the wind tunnel, and the Extra Wide Vision visor is paired with Airoh's A3S automatic antifog system plus a Pinlock 120 XLT lens supplied in the box.

Comfort comes from a hypoallergenic Coolmax liner that lifts out for washing, while the ASN and AEFR systems and ECE 22.06 approval cover the safety side.

Composite Carbon shell construction
Three shell sizes across the range (XS–S, M–L, XL–XXL–XXXL) for a closer fit
ECE 22.06 approved
Weight from 1440 g (±50 g)
Can be used in three different configurations
Ventilation system developed and optimised in the wind tunnel
ASN and AEFR rider safety systems
Extra Wide Vision visor for a broad field of view
Scratch-resistant and UV-resistant visor with lock system
A3S (Airoh Automatic Antifog System)
Pinlock 120 XLT lens included
Coolmax technical fabric liner, hypoallergenic, removable and washable
Wind stopper included
Double-D ring retention

Commander 2 helmet with visor fitted
Pinlock 120 XLT insert lens
Wind stopper

Brand	Airoh
Model	Commander 2
Type	Adventure full-face helmet, usable in three configurations
Colourway	White Gloss
Shell construction	Composite Carbon
Shell sizes	3 shells: XS–S / M–L / XL–XXL–XXXL
Weight	From 1440 g (±50 g)
Certification	ECE 22.06
Retention system	Double-D ring
Visor	Extra Wide Vision, scratch-resistant and UV-resistant, with lock system
Anti-fog	A3S (Airoh Automatic Antifog System); Pinlock 120 XLT lens included
Liner	Coolmax technical fabric with 2dry Microsense Sanited treatment; hypoallergenic, removable and washable
Safety systems	ASN and AEFR
Ventilation	Wind-tunnel developed ventilation system
Sizes stocked (this colourway)	S, M, L, XL, 2XL
SKU	HACOM2025
Barcode	8029243369837

Fasten the double-D ring correctly every ride: thread the strap through both rings, pull it snug under the jaw, then secure the loose end.
Wash the shell and vents with lukewarm water and mild soap or a dedicated helmet cleaner; never use petrol, solvents, ammonia-based glass cleaners or abrasive pads, as they attack the shell finish and visor coating.
Clean the visor with a soft cloth and warm soapy water only, and avoid dry-wiping grit across it — the scratch-resistant coating still marks.
Handle the Pinlock 120 XLT lens by its edges, clean it with a damp soft cloth and let it air dry; do not rub it dry or use chemical cleaners on the anti-fog surface.
Lift out the liner and cheek pads and hand-wash in lukewarm water with a mild detergent, then air dry away from direct sunlight and heaters — never machine dry or iron.
Refit the liner and cheek pads fully seated and check the visor and vent sliders move freely and the visor lock engages before riding.
Crack the visor open at low speed if fogging appears, and keep the Pinlock lens fitted in cold or wet conditions.
Store the helmet in a cool, dry place away from direct sunlight, fuel and exhaust fumes; don't hang it on a mirror or handlebar, where the liner and shell can be damaged.
Do not paint the shell, apply solvent-based stickers, or modify it to fit accessories — this can compromise the ECE 22.06 approval.
Replace the helmet after any significant impact, even if no damage is visible, and replace a visor that is deeply scratched or cracked.