Fuel your savings with exclusive deals.
Rev up your inbox with weekly deals, clearance steals, and promo codes.
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Call us at: 0433 880 748
Free shipping over $200 (excludes tyres and bulky items)
Need help? book@xpertmotogear.com.au
Explore related collections:
- ➔ Lighting (571 products)
- ➔ Internal and auxilliary lighting (146 products)
- ➔ Bulbs (136 products)
A replacement 6V headlight bulb rated at 35/35W with a BA20D two-pin bayonet base. The twin-filament design carries both the high and low beam in a single bulb, so one globe covers the full headlight function.
Suited to motorcycles, scooters and small-capacity machines running a 6-volt electrical system and a BA20D headlight socket. Check the base type and voltage of your existing bulb before ordering, as BA20D bulbs are also produced in 12V ratings that are not interchangeable.
- 6V operating voltage
- 35/35W twin-filament rating for high and low beam in one bulb
- BA20D base with two side pins for bayonet fitment
- Direct replacement globe for 6V motorcycle and scooter headlights
| Brand | Link International |
|---|---|
| Type | Headlight bulb (globe) |
| Voltage | 6V |
| Wattage | 35/35W (twin filament, high/low beam) |
| Base / Fitting | BA20D, two side pins |
| SKU | 45-736-9A |
- Confirm your existing bulb is 6V with a BA20D base before fitting — a 12V bulb of the same base will not perform correctly on a 6V system, and vice versa.
- Switch off the ignition and let the old bulb cool before removal; headlight globes stay hot well after the light is turned off.
- Handle the new bulb by its metal base and avoid touching the glass with bare fingers, as skin oils can create hot spots and shorten bulb life.
- If the glass is marked, clean it with methylated spirits on a lint-free cloth and let it dry fully before switching on.
- Align the two side pins with the slots in the socket, push in gently and twist to lock — do not force the bulb.
- Refit the headlight seal and lens correctly so moisture cannot enter the housing, which can cause premature failure.
- Check that both high and low beam operate after fitting, and confirm beam aim before riding at night.
- Carry a spare globe if you ride an older machine, and store spares in their packaging in a dry place away from vibration.
- If bulbs fail repeatedly, have the charging system and regulator checked, as over-voltage is a common cause.
- Choosing a selection results in a full page refresh.