XAM Sprocket Kit Suzuki DR200 Farm 12/47

The XAM Sprocket Kit is a matched front and rear sprocket combination designed to fit the Suzuki DR200. The 12/47 tooth configuration delivers more low-end pulling power compared to higher road-oriented gearing, making it a practical choice for DR200 owners who use their machine in farm, rural, or light off-road conditions.

Sold as a complete kit, it simplifies the process of replacing or re-gearing a worn drivetrain in a single purchase. XAM is a recognised name in motorcycle drivetrain components, producing sprockets across a broad range of fitments and applications.

• 12-tooth front sprocket and 47-tooth rear sprocket included as a matched kit
• Designed to fit the Suzuki DR200
• Farm and trail gearing ratio for increased low-speed torque and pulling power
• Suits owners looking to re-gear for paddock, property, and light off-road use

• Front sprocket (12T)
• Rear sprocket (47T)

Inspect the drive chain for stretch and wear before fitting new sprockets — a worn chain will accelerate wear on new sprockets and should be replaced at the same time.
Check that the front sprocket retaining clip or nut is secured and torqued to the motorcycle manufacturer's specification on installation.
Verify chain alignment after fitting both sprockets; misalignment causes uneven wear and premature failure.
Check and adjust chain tension after the first few rides following installation, as components may settle slightly.
Lubricate the chain regularly, especially in farm, dusty, or muddy conditions where contamination builds up quickly.
Inspect sprocket teeth periodically for hooking, sharp edges, or uneven wear — these are signs of chain stretch or alignment issues.
Keep the sprocket and chain area clear of caked mud and debris, which can accelerate wear and cause chain derailment.
Do not fit new sprockets with a stretched or worn chain, and do not fit a new chain over heavily worn sprockets.