X Tech KTM/Husq/Gas Gas 21-23 1.60x14 Rear BLK Rim/Red Hub/SLV SPK

A complete X-Tech rear wheel assembly in a 1.60x14 size, supplied built up with a black rim, red hub and silver spokes. It is offered as a direct replacement or spare wheel for 2021–2023 KTM, Husqvarna and GasGas models fitted with a 14-inch rear wheel.

Because it arrives as a complete assembly, it suits riders who want a second wheel ready to swap between tyre choices or race days, or a straight replacement for a damaged wheel. Please confirm the wheel size, hub and spacer fitment for your exact model and year before ordering.

• Complete rear wheel assembly supplied built up
• 1.60x14 rim size
• Black rim with red hub and silver spokes
• Listed fitment: KTM, Husqvarna and GasGas models 2021-2023 with a 14-inch rear wheel
• Suits use as a replacement wheel or a spare set-up for quick tyre changes

• Complete rear wheel assembly (rim, hub and spokes)

Confirm the wheel size, hub type, axle diameter, spacers and brake disc/sprocket fitment against your exact model and year before fitting.
Transfer or fit the correct rim lock, tube, brake disc, sprocket, bearings, spacers and cush drive components as required for your bike.
Check spoke tension before first use and re-check after the first ride or two, then regularly - new wheels commonly bed in and lose tension early on.
Tension spokes evenly in a criss-cross pattern and re-check wheel true and runout after any adjustment.
Torque the axle nut and any brake disc or sprocket fasteners to your motorcycle manufacturer's specified values.
Inspect the rim for dents, cracks and flat spots after heavy landings or rock strikes, and check the hub and bearings for play or roughness.
Keep tyre pressures at the levels recommended for your bike and riding conditions, and make sure the rim lock is tight to stop the tyre spinning on the rim.
Wash with mild soapy water and a soft brush, rinse and dry thoroughly; avoid harsh solvents, acidic wheel cleaners and high-pressure washing directly at the bearings or seals.
After riding in mud, sand or water crossings, clean the wheel promptly and check the bearings and seals for water ingress.
Store off the ground or with the tyre supported, out of direct sunlight, and keep spare wheels somewhere dry to avoid corrosion.