WMP Alloy Tailgate Folding Ramp 223x35cm 318kg Rated

Constructed from lightweight marine grade 6061 aluminium the WMP Alloy Tailgate Folding Ramp is strong and durable while maintaining excellent corrosion resistance.

Weighing 10.2kg it is portable while capable of withstanding weights up to 318kg. Rubber-coated fingers protect your loading surface and help prevent the stand from slipping.

Perfect for loading your motorbike once loaded the ramp doubles as a tailgate preventing your gear from flying off the back of your ute.

Features:

• Marine grade 6061 aluminium construction.
• Rubber-coated fingers protect loading surface.
• Both ends fold for easy storage during transport.
• Perfect when transporting your bike using a ute.
• Suitable for both Road and Off-Road motorcycles.

Specifications:

• Dimensions: 222cm W: 35.5cm
• Folded: Folded: 120cm x 35.5cm
• Loading capacity: 318kg

• Marine grade 6061 aluminium construction for strength and corrosion resistance
• Rated to a 318kg loading capacity
• Lightweight 10.2kg for one-person handling
• Rubber-coated fingers protect the loading surface and resist slipping
• Both ends fold down to 120cm x 35.5cm for storage and transport
• Doubles as a tailgate once the bike is loaded
• Suitable for road and off-road motorcycles

Before each use, unfold both ends fully and confirm the folding sections are locked flat and square before any weight goes on the ramp.
Seat the rubber-coated fingers squarely over the tailgate or tray edge so the ramp cannot slide sideways, and secure the ramp to the vehicle with a strap or tie-down before loading.
Never exceed the 318kg rated loading capacity, and keep the total of bike plus rider or handler within that limit.
Walk the bike up under control rather than riding it up, and have a second person assist where possible.
Check the ramp surface and your footwear are dry and free of mud, oil or fuel, as aluminium becomes slippery when contaminated.
Rinse with fresh water and mild detergent after use in mud, salt or coastal conditions, then dry before folding to avoid trapping moisture in the hinges.
Inspect the hinges, rivets, welds and rubber fingers regularly for cracks, wear, distortion or missing fasteners, and retire the ramp from service if any structural damage is found.
Fold the ramp for transport and store it flat in a dry place where it cannot be dropped, bent or driven over.
Do not modify, drill or weld the ramp, and do not use it as a bridge or spanning platform between two raised points.