WMP Paddock Stand - Rear - Dolly Type - with V-Hooks & L-Pads

The WMP Rear Paddock Stand — Dolly Type is a wheeled rear stand built for riders who need to park, shuffle and store a bike in a tight garage, carport or basement. Instead of fixed feet, it rides on three braked double wheels, so once the bike is up you can roll it into a corner and lock it in place.

It is rated to 200 kg, which covers most road bikes, and the stand itself weighs only 6 kg. Both V-hooks and L-pads are supplied, so you can set it up to suit your bike's rear pick-up points. Pair it with a matching front dolly stand and a whole bike can be repositioned with very little effort.

Ships flat-packed and detachable for compact delivery and storage.

• Dolly-type rear paddock stand — rolls on wheels rather than fixed feet
• 200 kg rated load capacity, suitable for most motorcycles
• Three double wheels with brakes for stable positioning once parked
• Supplied with both V-hooks and L-pads to suit different swingarm pick-up points
• Designed to pair with a front dolly stand for easy full-bike manoeuvring
• Detachable construction, flat-packed for compact shipping and storage
• Light to handle at 6 kg

• Rear dolly-type paddock stand (flat-packed, detachable)
• V-hook adapters
• L-pad adapters

Use only on a flat, level, load-bearing surface — uneven or soft ground can let the stand roll or tip under load.
Assemble fully before first use and check all fasteners are tight; re-check them periodically, as the stand is a detachable, flat-packed design.
Fit the adapter type that suits your bike: V-hooks for swingarms with suitable pick-up points, L-pads for bikes without them. Make sure both sides sit evenly and are properly seated before taking the weight.
Apply the wheel brakes before lifting the bike and whenever the bike is parked or being worked on; release them only when you intend to move the machine.
Do not exceed the 200 kg rated capacity, and avoid heavy side loads or pushing/pulling on the bike while it is raised.
For moving a whole bike, use with a matching front dolly stand so both wheels are supported before rolling.
Keep the wheels and brake mechanisms free of grit, chain lube and workshop debris so they roll and lock reliably.
Wipe the stand down after use and dry the metalwork if it has been in contact with water or cleaning chemicals to limit corrosion.
Store indoors in a dry area; the stand can be dismantled and flat-packed again if garage space is tight.