WMP REAR WHEEL TIEDOWN STRAP

Rear wheel tiedown strap designed to secure the rear wheel to the trailer or ground anchors when used in conjunction with tiedowns.

Constructed from durable and high-strength webbing with heavy-duty stitching. Suitable for all types of road and off-road motorcycles with rear wheels from 16 and up.

• Designed to attach at the rear wheel or axle, avoiding compression of fork or shock
• Keeps suspension in a neutral, unloaded position during transport
• Purpose-built for motorcycle trailer and ute-tray tie-down applications
• From Whites, a recognised Australian motorcycle accessories brand

Inspect the strap, buckle, and hooks before every use for signs of fraying, cuts, corrosion, or deformation — do not use a damaged strap.
Route the strap according to your trailer or ute-tray anchor points, ensuring a straight pull without sharp edges that could abrade the webbing.
Do not exceed the working load limit marked on the strap label; never use a tiedown strap as a primary lift sling.
After use, release tension gradually rather than unclipping under full load to avoid sudden rebound.
Clean webbing with mild soap and lukewarm water; rinse thoroughly and allow to dry completely before storage.
Store away from direct sunlight, heat sources, and chemicals such as fuel, solvents, or battery acid, which degrade webbing and hardware.
Coil or fold neatly and store in a bag or container to prevent tangling and UV exposure.
Replace the strap if the webbing shows fading, stiffness, or any structural damage — do not attempt to repair webbing yourself.