Wanda 13/6.50-6 P607 TL4PR Smooth Wind

The Wanda P607 in 13/6.50-6 is a tubeless, 4-ply rated tyre designed for ride-on mowers, garden tractors, and light ATV applications. Its smooth tread pattern minimises turf disturbance and suits low-speed operation on grass, gravel, and sealed surfaces.

Built to tubeless specification, the P607 eliminates the need for an inner tube, reducing the risk of pinch flats and making roadside pressure checks more straightforward. The 6-inch rim diameter and 4PR construction make it a direct-fit replacement for a wide range of common garden and utility equipment.

• Tubeless (TL) construction — no inner tube required
• 4-ply rating (4PR) for reliable load capacity on light utility equipment
• Smooth tread pattern designed to minimise turf and grass damage
• 13/6.50-6 sizing compatible with a wide range of ride-on mowers and garden tractors
• Sold as a single tyre

• 1 x Wanda P607 13/6.50-6 Tubeless Tyre

Check tyre pressure before each use and maintain at the equipment manufacturer's recommended PSI — do not rely on visual inspection alone for tubeless tyres.
Inspect the bead seat area when mounting; ensure the bead seats evenly around the full circumference before inflating.
Clean with mild soap and water; avoid petroleum-based solvents, tyre dressings, or chemicals that can degrade rubber compounds.
Inspect the tread and sidewalls regularly for cuts, cracking, bubbling, or embedded debris, and replace the tyre if structural damage is found.
Store tyres in a cool, dry place away from direct sunlight, ozone sources (electric motors, welders), and heat — ideally in a sealed bag if storing long-term.
Do not exceed the load rating stamped on the tyre sidewall; overloading can cause sudden failure.
When fitting a tubeless tyre, ensure the rim is in good condition with no cracks, rust, or deformation that could prevent an airtight seal.
After mounting, inflate slowly and check the bead for even seating before bringing the tyre to operating pressure.