VISOR RXT A-751 FULL FACE STONE (NEW STYLE - 3 Pin Washer)

A genuine replacement visor for the RXT A-751 Stone full face helmet, supplied in a dark tint for bright daytime riding. It suits the new style fitment with the 3-pin washer, so check which mechanism your helmet uses before ordering.

Ideal if your original visor has been scratched, chipped or hazed by road grit and cleaning, or if you simply want a second visor on hand to swap between clear and tinted depending on conditions. Fits all A-751 Stone helmets.

• Replacement visor for the RXT A-751 Stone full face helmet
• New style fitment with 3-pin washer
• Fits all RXT A-751 Stone helmets
• Dark tint for bright, sunny daytime riding
• Direct swap for a worn, scratched or damaged original visor

• One RXT A-751 Stone replacement visor (dark tint)

Confirm your helmet uses the new style 3-pin washer mechanism before fitting — the original 2-pin washer type visor is not interchangeable.
Remove the old visor and refit the new one with the helmet resting on a soft surface, making sure each pin and washer seats fully and the visor opens and closes without binding.
Do not over-tighten the visor mechanism screws; the visor should rotate freely and hold at each detent position.
Clean with lukewarm water and a mild soap using a soft cloth or sponge, then pat dry with a clean microfibre cloth.
Never use petrol, solvents, thinners, alcohol, ammonia-based glass cleaners or abrasive pads, as these can craze or fog the visor.
Do not wipe a dry, dusty visor — soak off insects and grit first, so trapped debris is not dragged across the surface.
A dark tint visor is for daytime use only; carry a clear visor for night, tunnel or low-light riding and be aware of your state's road rules on tinted visors.
Store spare visors flat in a soft bag or the original sleeve, away from direct sunlight and heat sources.
Replace the visor if it becomes deeply scratched, chipped or hazed, as this causes glare and distortion at night and in wet weather.