Twin Air Lubricants - IceFlow High Performance Coolant (1 Litre) (6)

The Twin Air IceFlow High Performance Coolant is a ready-to-use cooling system fluid from one of the motorcycle and powersports industry's most trusted consumables brands. Designed for riders who demand consistent engine temperature management, it is a practical addition to any workshop or pit setup.

Sold in a convenient 1-litre bottle, it suits top-up and maintenance use across a range of motorcycles and off-road machines. Twin Air's lubricant and fluid range is built to the same standards as their filtration products, making IceFlow a reliable choice for routine cooling system servicing.

• High performance coolant formulated for motorcycle and powersports applications
• 1-litre bottle suitable for top-ups and cooling system flushes
• Part of Twin Air's dedicated lubricants and fluids range

• 1 x Twin Air IceFlow High Performance Coolant (1 Litre)

Check your motorcycle's owner manual for the correct coolant capacity and recommended service interval before use.
Always allow the engine to cool completely before opening the radiator cap or coolant reservoir — never open under pressure.
If topping up only, add coolant to the reservoir to the marked maximum level; avoid overfilling.
When performing a full flush, drain the old coolant completely, rinse the system with clean water if recommended by your manual, then refill.
Dispose of used coolant responsibly in accordance with local council and environmental regulations — do not pour down drains or onto soil.
Store unused coolant in its original sealed container, away from heat sources, direct sunlight, and out of reach of children and animals.
Do not mix with other coolant brands or types unless confirmed compatible, as mixing can reduce effectiveness or cause deposits.
After refilling, run the engine briefly with the cap loose or off (where safe) to purge air pockets, then top up as needed once the thermostat opens.