Scorpion H/Bar Cruiser Beach Bar 1 Inch Chrome

The Scorpion Cruiser Beach Bar is a chrome handlebar designed for 1 inch clamp cruiser motorcycles. Its beach bar profile suits riders who prefer a relaxed, laid-back riding position common to cruiser and custom builds.

Finished in chrome, it is suited to factory-style or custom cruiser builds where classic aesthetics matter. Compatible with standard 1 inch (25.4 mm) handlebar controls and clamps.

• 1 inch (25.4 mm) diameter — fits standard cruiser controls and clamps
• Beach bar style profile for a relaxed, low riding position
• Chrome finish for a classic cruiser aesthetic
• Designed for cruiser motorcycle applications

Torque all clamp bolts to the motorcycle manufacturer's specified torque setting — do not over-tighten, as this can crack chrome plating or distort the bar.
Ensure all controls (throttle, brake, clutch), cables, and wiring harnesses are routed correctly and have adequate slack after fitting.
Inspect cable routing after installation to confirm no binding or pinching occurs at full lock in both directions before riding.
Clean chrome surfaces with a soft cloth and a chrome-safe polish; avoid abrasive cleaners or steel wool that will scratch the finish.
Rinse with fresh water and dry thoroughly after exposure to rain, salt air, or road grime to prevent corrosion beneath the chrome.
Store in a dry environment; consider applying a light coat of chrome protectant if the motorcycle is stored long-term.
Periodically check clamp bolts and control mounts for tightness, particularly after the first few rides following installation.