Rjays Tour Air 2 JKT BLK/BLU

The Rjays Tour Air 2 is a vented textile touring jacket built for riders who want airflow through the warmer months without giving up all-season versatility. Large mesh panels sit alongside a 450D polyester outer shell and abrasion-resistant mesh, so air moves through the jacket while the high-wear areas keep their substance.

Two removable liners do the heavy lifting when conditions change: a waterproof liner rated to 15,000mm for wet days, and a 100g thermal liner for cold starts and early-morning commutes. Strip both out and the jacket becomes a summer mesh jacket; put them back in and it handles touring and shoulder-season riding.

Protection comes from CE armour in the shoulders and elbows with an EVA rubber back pad, while arm and waist adjusters, a microfibre-trimmed collar and cuffs, and six pockets round out the everyday fit and function. Supplied in the black/blue colourway.

• 450D SD polyester outer shell with abrasion-resistant mesh panels
• CE armour fitted in the shoulders and elbows
• EVA rubber back pad
• Removable waterproof liner rated to 15,000mm
• Removable 100g thermal liner for cooler riding
• Large mesh panels for high airflow in warm weather
• Multi-panel poly mesh comfort liner
• Arm and waist adjusters to fine-tune the fit
• Microfibre comfort collar and cuffs
• Three outer and three inner pockets
• Reflective welding for low-light visibility
• Snap button wrist closure
• Waist connection zip to join compatible riding pants

• Rjays Tour Air 2 jacket with CE shoulder and elbow armour and EVA back pad fitted
• Removable waterproof liner
• Removable 100g thermal liner

Remove the waterproof liner, thermal liner and all armour before washing the outer shell.
Wash the outer shell by hand in cool water with a mild detergent; avoid bleach, fabric softener and solvent-based cleaners, which can damage the coating and reflective welding.
Rinse the mesh panels thoroughly to clear road grime, insects and salt, as trapped debris reduces airflow over time.
Drip dry in the shade with the zips open; keep the jacket away from direct heat sources, tumble dryers and hot irons.
Wipe the removable waterproof liner clean and allow it to dry fully before refitting, so moisture is not sealed inside the shell.
Refit the CE shoulder and elbow armour and the EVA back pad before riding, checking each piece sits flat and square over the joint.
Inspect the armour pockets, main zip, snap button cuffs and waist connection zip regularly, and replace armour that has been impacted or has hardened.
Set the arm and waist adjusters so the armour stays in position at riding speed rather than shifting under wind pressure.
Store on a wide hanger in a cool, dry place out of direct sunlight, with the liners stored flat rather than compressed.
Run the waterproof liner in for wet rides and remove both liners in hot weather to get the full benefit of the mesh panels.