Putoline TT Scooter Scented Injector Engine Oil (2T)

TT Scooter Scented is a synthetic, low-smoke, clean-burning, high-performance 2-stroke oil. TT Scooter Scented is recommended for regular and high-performance road use. It is suitable for pre-mix and injection systems. The product has the following properties:

• Minimises smoke development
• Minimises carbon deposits
• Counteracts fouling on the spark plugs
• Extends the service life of the engine
• Strawberry aroma

Recommended mix ratio: 2-4%.

Specifications:

• API TC
• JASO FD
• TISI

Properties:

• De 15°C: 0.855kg/L
• Viscosity 40°C: 33.7mm²/s
• Viscosity 100°C: 6.75mm²/s
• Viscosity Index: 153
• Flash Point: 122°C
• Pour Point: -39°C
• Total Base Number: 1.4mgKOH/g

• Synthetic two-stroke oil for scooters, suitable for road and high-performance road use
• Compatible with both pre-mix and oil injection systems
• Low-smoke, clean-burning formulation
• Minimises carbon deposits in the engine and exhaust
• Helps counteract spark plug fouling
• Formulated to extend engine service life
• Strawberry-scented exhaust aroma
• Meets API TC, JASO FD and TISI performance specifications
• Recommended mix ratio of 2–4% for pre-mix use
• 1 litre bottle

• 1 L bottle of Putoline TT Scooter Scented 2T engine oil

Always follow your scooter manufacturer's specified oil ratio or injection setting first; where a ratio is not specified, Putoline recommends 2–4% for pre-mix use.
For injection systems, pour directly into the oil tank and avoid letting the tank run dry.
For pre-mix, add the oil to the fuel container and agitate before filling so the oil and petrol are fully blended.
Mix only the quantity of fuel you expect to use in the short term, as pre-mixed fuel can separate and degrade over time.
Check that the oil meets the specification your engine calls for (this product is API TC, JASO FD and TISI rated) before switching from another two-stroke oil.
Keep the bottle tightly capped and store it upright in a cool, dry place out of direct sunlight and away from ignition sources.
Wipe up spills promptly, as spilled oil on paintwork, tyres or floors is slippery and can stain.
Keep out of reach of children and avoid prolonged skin contact; wash hands after handling.
Dispose of used oil and empty containers through a council or workshop oil recycling facility, never down drains or in general waste.
Refer to the manufacturer's safety data sheet for full handling, first-aid and disposal information.