Oxford Aquatex Motorcycle Waterproof Cover

The Oxford Aquatex is a shaped, double-PU-coated polyester cover built to keep rain, dust and UV off your bike or scooter. It suits both outdoor parking and indoor storage, so it works equally well for a bike that lives on the driveway and one that sits in a shed or garage between rides.

An elasticated hem and belly strap pull the cover in tight so it stays put, and built-in lock holes let you thread a chain or disc lock through the cover and the bike together — a simple visual deterrent that also stops the cover walking off. The fabric is light enough to fold down into the included zipped carrier and stash under the seat or in a top box.

Available in six shaped sizes, including dedicated scooter, MP3 and high-screen patterns, so you can match the fit to your machine rather than draping a generic sheet over it.

• Double-stitched polyester construction for seam strength and durability
• Double PU coating for water resistance in outdoor parking
• UV-resistant fabric that will not degrade in sunlight
• Shaped cut with full exterior and interior coverage
• Elasticated base hem plus belly strap for a snug, wind-resistant fit
• Lock holes let you pass a chain lock through the cover and the bike
• Suitable for both outdoor and indoor storage
• Packs into the supplied zipped carrier bag for storage on the bike
• Six shaped sizes, including Scooter, MP3 and high-screen patterns

• Oxford Aquatex motorcycle cover
• Zipped carrier bag

Let the engine, exhaust and pipes cool completely before fitting — the cover must not touch hot exhausts or engine parts.
Check the bike and the ground around it for sharp objects, grit or overhanging branches that could pierce or abrade the fabric.
Brush loose dirt and grit off the bike before covering, so trapped debris does not rub against paintwork in the wind.
Fit the elasticated hem under the bike, then fasten the belly strap underneath to stop the cover lifting or flapping in strong wind.
For added security, thread a chain lock through the lock holes so the cover and the bike are secured together.
Sponge the cover clean with cool water and a mild soap, rinse it off and let it air dry; avoid solvents, petrol-based cleaners and harsh detergents that can attack the PU coating.
Do not put the cover away damp — hang it out to dry fully before folding it, or mildew and odour can develop inside the carrier bag.
Store it folded in the supplied zipped carrier when it is not on the bike, and keep the bag somewhere dry.
Inspect the seams, elastic and belly strap from time to time and repair small tears early before wind spreads them.