LS2 Travel Men's Pant - Black / Dark Grey

The Travel trousers offer unmatched comfort and protection with a waterproof and breathable membrane. Featuring a removable thermal liner and stretch fabric crotch panel, they set a new standard for all-weather riding.

MATERIALS AND FABRICS

• Outer shell: 600D Oxford fabric, Ripstop fabric, Stretch fabric
• Insulation: Removable thermal liner
• Waterproofness: Fixed waterproof and breathable membrane (8000mm H2O)
• Breathability: 5000g/m²/24hrs

CERTIFIED

• Class AA (EN17092-3:2020)

PROTECTION SYSTEM

• Removable CE knee protectors EN1621-1:2012 Level 1 with adjustable system, 3 possible protector positions
• Included CE Level 1 hip protector

FEATURES

• Elastic stretch fabric at the crotch, knees, and back waist for maximum flexibility and comfort
• 2 Dual snap buttons
• Two large waterproof side pockets
• Ventilation zipper
• Snap buttons to fasten air vent zippers on legs
• Anti-slip seat patch
• Two-way zipper
• Exhaust port
• Reflective strips for enhanced visibility at night
• Adjustment straps for a comfortable fit
• YKK zipper for jacket attachment

• Class AA certified to EN 17092-3:2020
• Fixed waterproof and breathable membrane rated 8000mm H2O
• Breathability rated 5000g/m²/24hrs
• 600D Oxford, ripstop and stretch fabric outer shell
• Removable thermal liner for cold-weather riding
• Removable CE EN 1621-1:2012 Level 1 knee protectors with three height positions
• CE Level 1 hip protectors included
• Stretch panels at the crotch, knees and rear waist for riding-position comfort
• Two large waterproof side pockets
• Leg ventilation zips with snap buttons to hold vents open, plus exhaust port
• Anti-slip seat patch
• Two-way main zip and dual snap-button waist closure
• Waist adjustment straps for fit tuning
• YKK connection zip for attaching a compatible jacket
• Reflective strips for improved night-time visibility

• LS2 Travel Men's Pant
• Removable thermal liner
• Pair of CE Level 1 knee protectors
• Pair of CE Level 1 hip protectors

Before washing, remove the knee protectors, hip protectors and thermal liner — armour should never go through the machine or dryer.
Wash the outer shell separately on a gentle, cool cycle with a mild detergent; skip fabric softener, bleach and any solvent-based cleaner, as these can clog the membrane and strip the fabric's water repellency.
Hang the pant to dry away from direct heat sources such as radiators, heaters or a clothes dryer.
Spot-clean the thermal liner by hand and let it air dry fully before refitting, so moisture is not trapped against the membrane.
Wipe the protectors with a damp cloth and mild soap only, and air dry them out of direct sunlight.
Set the knee protectors to the position that puts them over the centre of your kneecap while seated on the bike, and check the height again after any change in boots or seat position.
Use the waist adjustment straps to remove excess slack — armour only works when it stays where it is placed.
After riding in the rain, hang the pant to dry at room temperature and leave the pockets and vents open so trapped water can escape.
If water starts beading less on the outer fabric, refresh it with a wash-in or spray-on DWR treatment suitable for technical waterproof textiles; this restores surface repellency without affecting the membrane.
Store clean and completely dry on a hanger in a cool, ventilated spot away from prolonged sunlight, rather than folded in a compressed bag.
Inspect zips, seams, snap buttons and reflective strips periodically, and keep the YKK jacket-connection zip free of grit so it runs smoothly.
Retire the garment and its armour after any crash impact, even where damage is not visible.