LS2 Narvik Men's Jacket - Blue / Black / Grey / Red

The LS2 Narvik is a four-season touring jacket built for riders who don't stop for the weather. A fixed waterproof, breathable membrane keeps rain out while letting perspiration escape, and the removable thermal liner lets you run the same shell through a cold morning start and a warm afternoon run home.

The outer shell combines 600D and 450D Oxford fabrics with ripstop panels, and the jacket is certified to EN 17092-3:2020 Class AA with removable CE Level 1 shoulder and elbow armour fitted as standard. Multiple intake and exhaust vents, arm and waist adjusters and a two-way front zip mean you can fine-tune airflow and fit on the move.

Suited to commuting, all-weather touring and adventure riding, in a blue, black, grey and red colourway.

• Certified to EN 17092-3:2020 (Class AA)
• Fixed waterproof and breathable membrane rated to 8,000mm H2O
• Breathability rated at 5,000g/m²/24hrs
• Outer shell in 600D Oxford, 450D Oxford and ripstop fabric
• Removable thermal liner for cold-weather riding
• Removable CE Level 1 shoulder and elbow protectors to EN 1621-1:2012
• Elbow protectors adjustable to two positions
• Pocket for optional LS2 CE chest protector and LS2 851 Level 2 back protector
• YKK front zip with two-way operation
• Front ventilation zip plus button-closure ventilation panels
• Double rear exhaust ventilation
• Arm and waist adjusters for fit tuning
• Hook-and-loop adjusters and side hook to hold the collar open
• Neoprene collar with comfort edging
• Two large waterproof hand pockets and a waterproof rear pocket
• Inner phone pocket
• Two-way zip for a wide sleeve opening
• Zipper-pants ready for connection to matching LS2 trousers
• Reflective strips for low-light visibility

• LS2 Narvik men's jacket
• Removable thermal liner
• CE Level 1 shoulder protectors (fitted)
• CE Level 1 elbow protectors (fitted)

Remove the thermal liner and take out the shoulder and elbow protectors before washing — armour and liners should never go through a machine wash cycle.
Wash the outer shell separately from other garments, using a mild detergent only; avoid bleach, fabric softener, solvents and dry-cleaning chemicals, as they degrade the waterproof membrane and any surface treatment.
Close all zips and secure hook-and-loop adjusters before washing so they don't snag or abrade the fabric.
Drip dry or hang dry at room temperature away from direct sunlight, radiators and heaters. Do not tumble dry and do not iron over the membrane, reflective strips or printed panels.
Spot-clean light road grime and insect residue with a soft damp cloth and warm water rather than washing the whole jacket.
Wipe the protectors with a damp cloth and let them dry fully before refitting; replace any protector that has been impacted in a crash or has become cracked, hardened or deformed.
Refit the elbow protectors in whichever of the two available positions best aligns with your elbow on the bike, and check the shoulder protectors sit over the joint before riding.
Check the waterproof pocket zips and main YKK zip run freely; keep them free of grit and lubricate sparingly with a zip lubricant if they become stiff.
In heavy rain, close the front and rear ventilation openings and the button-closure panels — open vents will let water in regardless of the membrane.
Hang the jacket on a wide hanger in a cool, dry, well-ventilated place. Store it completely dry, and never pack it away damp or compressed for long periods.
When pairing with LS2 zipper-ready trousers, connect the waist zip before riding so the jacket cannot ride up.