Leatt 9.5 Helmet Kit - Carbon / White

The Leatt Moto 9.5 Helmet Kit pairs the carbon-shelled Moto 9.5 off-road helmet with a set of Velocity 6.5 Iriz goggles, so head, brain and eye protection are matched as one system rather than assembled piecemeal. It is Leatt's flagship motocross lid, built around the brand's patented 360° Turbine Technology and four densities of impact foam.

Made for motocross, enduro and off-road riders who want top-tier protection without carrying extra weight, the carbon matrix shell keeps the helmet light while the Pro-Fit liner adapts to a range of head shapes. Ventilation channels move air even at trail speeds, and the shape is designed to work with a neck brace.

Finished in the V25 Carbon/White colourway and supplied with a helmet bag, visor extension and plastic-free packaging.

• Kit pairs the Moto 9.5 carbon helmet with Velocity 6.5 Iriz goggles
• 360° Turbine Technology helps reduce peak linear and rotational brain acceleration at concussion-level impact speeds
• Carbon matrix shell, available in three shell sizes
• Four densities of impact foam to absorb and disperse collision forces
• Certified to ECE 22.06 and DOT
• Pro-Fit modulating comfort liner suits a range of head shapes
• Large ventilation channels keep airflow up even at lower speeds
• Visor with breakaway function to reduce forces to head and neck in a crash
• Quick-release visor and cheek pads, plus emergency cheek pad removal
• X-Static inner liner is washable, breathable and moisture-wicking with anti-odour treatment
• Shaped to allow good neck brace mobility
• Hydration side port, compatible with an optional hands-free kit
• Plastic-free packaging

• Moto 9.5 carbon helmet
• Velocity 6.5 Iriz goggles
• Helmet bag
• Helmet visor extension

Measure the circumference of your head just above the eyebrows and match it to the size chart before ordering; the helmet should be snug with no movement when you shake your head.
Remove the X-Static comfort liner and cheek pads and hand wash them in lukewarm water with mild soap, then air dry away from direct heat and sunlight before refitting.
Clean the shell and visor with a soft damp cloth and mild soap only — petrol, solvents, thinners and harsh cleaners can damage the carbon finish and the shell structure.
Use the quick-release function to remove the visor and cheek pads for cleaning or replacement, and refit them fully so they lock into place before riding.
Remember the visor is designed to break away in a crash; if it detaches or its mounts are damaged, replace the visor rather than forcing it back on.
Fit the visor extension when you want extra sun or roost coverage, and check all visor screws are secure before each ride.
Rinse mud from the ventilation channels with low-pressure water rather than a pressure washer, and let the helmet dry naturally with the liner removed.
Store the helmet in the supplied helmet bag in a cool, dry place, away from direct sunlight, fuel vapours and anything that could knock or compress it.
For the Velocity 6.5 Iriz goggles, let mud dry and dust it off rather than rubbing; blot the inner lens dry rather than wiping it to protect the anti-fog coating.
Replace the helmet after any significant impact, even if there is no visible damage, as the impact foams and turbines are designed to deform once.
If using the hydration side port, fit the optional hands-free kit according to Leatt's instructions and route the hose so it cannot snag.
Always fasten and adjust the retention strap correctly before riding — a loose strap will not hold the helmet in place in a crash.