Leatt 3.5 Ride Kit - Stealth Black / Grey

The Leatt Ride Kit 3.5 in Stealth pairs a matching off-road jersey and pant in one purchase, aimed at riders who want dependable trail, track and enduro kit without stepping up to a race-level price. The jersey is built from 3D stretch mesh for airflow and free movement, while the pre-curved pant is shaped to sit comfortably in the riding position.

It suits weekend motocross, trail and enduro riders, and works equally well for anyone kitting out for the first time or replacing a worn set. Both pieces are finished with a PFAS-free DWR treatment so dirt and water shed rather than soak in, and the jersey collar is cut low enough to be worn with or without a neck brace.

Sold as a jersey and pant set in the Stealth black and grey colourway.

• Matched jersey and pant set in the Stealth black/grey colourway
• Jersey in 3D stretch mesh fabric with air channels for ventilation
• Classic riding fit that works with or without body armour
• Low-profile jersey collar suitable for use with or without a neck brace
• Overlock stitched jersey seams to reduce rubbing
• Fade-resistant digitally printed graphics
• Pre-curved pant cut for a natural position on the bike
• 360° heavy-duty silicone waist grip with micro-adjuster
• Knit stretch panels with 30% two-way stretch through the pant
• Multi-layer inner knee reinforcement with heat-proof leather on the right side
• Padded knee construction and multi-row reinforced stitching in high-wear areas
• Mesh pant lining for breathability
• YKK Japan zippers
• DWR C0 (PFAS-free) dirt and water repellent finish
• OekoTex certified and REACH tested, supplied in plastic-free packaging
• Jersey 240 g and pant 900 g in size large
• Available XS to 5XL

• Leatt Moto 3.5 jersey
• Leatt Moto 3.5 pant

Knock off dried mud and rinse heavy dirt from the pant before washing so grit is not ground into the fabric.
Close all zippers and any waist fasteners before washing to protect the mesh and printed graphics.
Wash with like colours and turn the jersey inside out to preserve the digitally printed graphics.
Avoid fabric softeners, bleach and harsh detergents — they coat the fibres and reduce the DWR C0 water and dirt repellency.
Do not dry clean; air dry away from direct sunlight and heat sources rather than using a hot dryer.
Do not iron over the printed graphics or the silicone waist grip.
If water starts soaking in rather than beading, reapply a PFAS-free DWR treatment made for technical apparel.
Check the waist micro-adjuster and silicone grip periodically and keep the silicone free of detergent residue so it keeps its hold on your jersey.
Fit the jersey over your body armour or neck brace before riding to confirm the collar and shoulders sit clear and unrestricted.
Inspect the knee panels, seat and inner leg after heavy use, and repair or replace the pant if the reinforcement or heat-proof leather is worn through.
Store clean and completely dry in a ventilated space — sealing damp kit in a gear bag encourages odour and mildew.