PINLOCK 30 suit RXT 825-STREET 2 - 909P SAFARI - 918 FlIP UP - CLEAR

A genuine Pinlock 30 anti-fog insert lens in clear, made to fit the visor of the RXT FS825 Street 2, RXT 909P Safari and RXT 918 Flip-Up helmets. The same insert suits all three models, so one part covers the RXT range.

The insert locates on the pins inside the visor and seals against it, creating a sealed air gap that keeps the inner surface warmer than the outside air and helps stop condensation forming in front of your eyes. It is a straightforward upgrade for commuters and touring riders who deal with cold mornings, rain and stop-start traffic, where a fogged visor is at its most distracting.

Fitment note: intended for RXT visors with Pinlock pins already fitted.

• Genuine Pinlock 30 anti-fog insert lens
• Clear tint for day and night riding
• Direct fit for RXT FS825 Street 2, RXT 909P Safari and RXT 918 Flip-Up visors
• One insert suits all three RXT helmet models
• Locates on the visor's Pinlock pins and seals against the visor to create an insulating air gap
• Removable and replaceable without changing the whole visor

• Pinlock 30 insert lens (clear)

Fit the insert with the visor removed or held steady: locate one side on the visor pin, flex the insert gently and locate the other side, then close the visor so the seal beds evenly against it.
If a gap or fogging appears at the edge, adjust the eccentric visor pins slightly to increase pressure on the seal, then re-check.
Handle the insert by its edges — the inner anti-fog surface is a moisture-absorbing coating and marks easily.
Clean only with lukewarm water and a soft microfibre cloth, using light pressure; never rub the coated side hard or scrub it dry.
Do not use solvents, petrol, ammonia-based glass cleaners, alcohol wipes or abrasive cloths on the insert or the visor.
Let the insert air dry fully before refitting; do not use heat, a hair dryer or direct sunlight to speed it up.
Remove the insert before deep-cleaning or polishing the visor, and before storing the helmet for long periods in hot conditions.
Store the helmet out of direct sunlight and away from heat sources so the insert and its seal are not distorted.
Replace the insert if it becomes scratched, hazed or no longer seals to the visor, as anti-fog performance drops once the coating is damaged.