Motomuck MC Cleaner 20L

Motomuck Original Cleaner is a spray-on, rinse-off motorcycle cleaner supplied in a bulk 20-litre cube. It is non-caustic and acid free, so it lifts fresh and baked-on grime without attacking the aluminium, alloy and plastic finishes on your bike over repeated washes.

The formula does the scrubbing for you: lay on an even coat, let it dwell, then rinse it away — no brushes needed around engine cases, linkages and other tight areas that are awkward to reach. It also leaves a protective film behind that helps keep dirt from sticking and lifts the surface finish.

Best suited to riders, race teams, workshops and dealerships who go through cleaner in volume and want to decant into their own spray bottles or fit a tap to the cube.

• Non-caustic, acid-free formula
• Safe on aluminium, alloy and plastics without fading them over time
• Spray on, leave 5–10 minutes, then rinse off — no brushing required
• Cuts through both fresh and long-standing grime
• Reaches tight areas around the motor that brushes cannot
• Leaves a protective film that helps prevent dirt sticking
• Restores and enhances the original surface lustre
• Bulk 20-litre cube for high-volume use
• Bung thread on the cube accepts an add-on drain tap

• 20 L cube of Motomuck Original Cleaner

Spray or apply an even layer of cleaner over the dirty surfaces — there is no need to agitate with brushes.
Allow the cleaner to dwell for 5–10 minutes so it can break down fresh and older grime.
Rinse the bike off thoroughly with water; repeat on any heavily soiled areas rather than extending the dwell time indefinitely.
Decant from the 20 L cube into a spray bottle or pressure sprayer for everyday use, or fit a drain tap to the cube's bung thread for easier dispensing.
Keep the cube sealed and sitting level and stable when not in use, and refit the bung or close the tap after decanting to avoid spills.
Store in a cool, dry place away from direct sunlight and out of reach of children and pets.
Rinse any accidental overspray from adjacent painted or polished surfaces with water rather than letting it sit.
Always follow the directions and safety information printed on the container label.