Metzeler Cruisetec 150/80R17 75V Front TL

The Metzeler Cruisetec is a radial front tyre engineered for cruiser motorcycles, designed to handle the high static and dynamic loads characteristic of heavyweight bikes while delivering confident performance across varying road conditions.

The 150/80R17 fitment suits a wide range of popular cruiser platforms. Its tubeless (TL) construction and V speed rating make it a capable choice for riders who cover extended distances on the open road.

Built and sold as a front-specific tyre, the Cruisetec is a straightforward, dependable fitment for riders seeking a quality replacement from an established European tyre manufacturer.

• Front-specific fitment in 150/80R17 size for cruiser motorcycles
• Radial (R) construction for improved load distribution and ride comfort
• Tubeless (TL) design for easier roadside tyre repair
• Load index 75 — rated to carry up to 387 kg
• Speed rating V — suitable for sustained speeds up to 240 km/h
• 17-inch rim diameter with 150 mm section width and 80 aspect ratio

• 1x Metzeler Cruisetec 150/80R17 75V TL front tyre

Have the tyre fitted and balanced by a qualified tyre technician using equipment appropriate for tubeless motorcycle tyres.
Bed in new tyres gradually over the first 100–200 km — avoid maximum lean angles, hard braking, and aggressive acceleration until release compounds have worn from the tread surface.
Check cold inflation pressure before each ride using an accurate gauge and inflate to the front axle pressure specified in the motorcycle manufacturer's handbook.
Never exceed the tyre's rated load (load index 75 / 387 kg) or speed (rating V / 240 km/h) during use.
Inspect tread depth and both sidewalls regularly for embedded objects, cuts, cracking, or bulges; remove from service immediately if any structural damage is found.
Do not attempt to repair a tyre that has been ridden flat, even briefly — internal damage may not be visible from outside.
Do not apply tyre dressing, petroleum-based solvents, or chemical cleaners to the tread or sidewalls, as these can degrade the rubber compound and reduce grip.
Store unmounted tyres horizontally or upright in a cool, dry, dark location away from direct sunlight and ozone sources such as electric motors or generators.