Merlin Perton II Cotec Jacket Black

The Merlin Perton II Cotec is the second generation of Merlin's short-cut waxed cotton motorcycle jacket, reworked using feedback gathered from riders since the original launched. It is built from 8oz Cotec, a Halley Stevenson® and Merlin collaboration fabric exclusive to the brand that is half the weight of traditional waxed cotton while being twice as strong.

A Texland™ Humax® waterproof and breathable membrane keeps the weather out, and the zip-out thermal liner uses Outlast® temperature regulating technology so the jacket can be adapted as conditions change. D3O® armour is fitted at the shoulders, elbows and back, and the shell carries a CE Level AA rating.

It suits the rider who wants heritage looks and modern protection in the same garment — equally at home on a classic, a modern retro or a naked bike, and discreet enough to keep on once you're off the bike.

• 8oz Halley Stevenson® Cotec waxed cotton shell, exclusive to Merlin — half the weight and twice the strength of traditional waxed cotton
• Texland™ Humax® waterproof and breathable membrane
• Zip-out thermal liner with Outlast® temperature regulating technology
• CE Level AA rated garment
• D3O® LP1 shoulder and elbow armour fitted
• D3O® Viper large back protector pre-fitted
• British Marton Mills® tartan liner trim
• YKK® zippers used throughout
• Leather piping to collar, cuffs and pocket edges, with corduroy collar and cuffs
• NightGloss® reflective turn-up on the collar
• Front and rear ventilation points
• Two chest pockets with expansion pleats and two lower waterproof pockets with expansion pleat
• Large rear cargo pocket for gloves or accessories
• Side-entry hand warmer pockets with magnetic closure
• Internal jet pocket and forearm toll/coin stash pocket
• Drawcord waist adjustment and snap-stud adjusters at cuff, forearm and bicep
• Pinch-closure centre front snap studs
• Diamond quilting to arms, chest and elbows
• Merlin branded antique hardware
• Short jacket-to-jean connecting zip plus Euro hoop connecting strap

• Merlin Perton II Cotec jacket
• D3O® LP1 shoulder and elbow armour (fitted)
• D3O® Viper large back protector (fitted)
• Removable Outlast® thermal liner (fitted)

Remove the D3O® shoulder, elbow and back armour and unzip the Outlast® thermal liner before cleaning the shell.
Clean the waxed cotton shell by hand with cold water and a soft cloth or sponge only — do not machine wash, dry clean, tumble dry or iron.
Avoid detergents, soaps, solvents and stain removers on the waxed outer; they strip the wax finish and reduce water resistance.
Hang the jacket to dry naturally at room temperature, away from direct heat sources, radiators and sunlight.
Re-proof the shell with a waxed cotton dressing when the fabric starts to look dry or water stops beading, concentrating on seams, cuffs, collar and other high-wear areas.
Expect some waxed cotton characteristics in use — the finish will mark, crease and may transfer colour onto light-coloured clothing or seats, particularly when new or freshly re-waxed.
Wash the removable thermal liner separately and follow the care label sewn into it.
Check before each ride that the D3O® armour sits correctly in its pockets over the shoulders, elbows and spine, and that the back protector has not shifted.
Do the cuff, forearm, bicep and waist adjusters up so armour stays in position rather than sliding on impact.
Use the jacket-to-jean zip or Euro hoop strap with compatible riding jeans to stop the short cut riding up.
Store on a wide hanger in a cool, dry, ventilated space — not compressed in a bag or sealed plastic, which can mark the wax.
Inspect zips, snap studs and stitching periodically, and replace armour or the garment after a crash impact.