(LSR-K0DK34ST) TOP CASE FITTING KTM DUKE 125/200/390 (2011-2021)

The SHAD Top Master fitting kit is the model-specific mounting frame that lets you run a SHAD top case on a KTM Duke 125, 200 or 390. Rather than a universal rack, it is engineered around this bike's existing mounting points, so the case sits low, square and secure without improvised hardware.

It suits commuters and everyday riders who want lockable, removable storage for a helmet, laptop or shopping, then a clean tail once the case comes off. The fitting is the bike-side half of the system: you also need a SHAD mounting plate, which is supplied with most SHAD and SHAD TERRA top cases.

Fitment note: this kit is listed for 2011-2021 first-generation Duke models, though year coverage differs slightly between the 125, 200 and 390. Please confirm your exact model year against SHAD's fitment list before ordering.

• SHAD Top Master fitting designed specifically for the KTM Duke 125/200/390
• Bolts to the motorcycle's existing mounting points - no modification required
• Allows the top case to be fitted and removed quickly and repeatedly
• Compatible with all SHAD and SHAD TERRA top cases via a SHAD mounting plate
• Suits small (D1B29PA), medium (D1B40PA) and large (LSA-D1B591PA) mounting plates
• Mounting plate is included with SHAD top cases, except the TR48 and TR37
• Not compatible with the SHAD aluminium mounting plate

Fit the kit using the SHAD instructions supplied for this part number, and tighten all fasteners to the torque values SHAD specifies - do not guess or overtighten.
Check that you have a compatible SHAD mounting plate before installation; the fitting alone will not accept a top case, and most SHAD top cases (other than the TR48 and TR37) include the plate.
Do not use the SHAD aluminium mounting plate with this fitting - it is not compatible.
Re-check the mounting bolts after the first ride and then periodically, as vibration can loosen hardware over time.
Before each ride, confirm the top case is fully latched and locked onto the plate and does not move when pushed by hand.
Keep the load within the limits SHAD states for your top case, and pack heavier items low and forward to limit the effect on handling.
Rinse road salt, mud and grime from the brackets with fresh water and dry them; avoid pressure washers directly on the mounting points and fasteners.
Inspect for corrosion, cracks or elongated bolt holes when you clean the bike, and stop using the fitting if any bracket is damaged or distorted.
Keep the plate's locking mechanism and keys clean; a light spray of dry lubricant on the latch helps it keep operating smoothly.
Remove the top case when it is not needed to reduce weight and wind buffeting - the fitting can stay on the bike.