Gear advice for your next ride
Subscribe to XPERT Moto Gear emails for practical riding advice, product ideas and workshop updates. Unsubscribe anytime.
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Call us at: 0433 880 748
Free shipping over $200 (excludes tyres and bulky items)
Need help? book@xpertmotogear.com.au
Explore related collections:
- ➔ Aesthetic and styling accessories (274 products)
- ➔ Keiti (45 products)
- ➔ Lighting and visibility accent (26 products)
- ➔ Reflectors (19 products)
The Keiti Wheel Stripe Kit is a self-adhesive reflective rim tape designed to add a clean, high-visibility accent to motorcycle wheels. At 6 metres in length and 7mm wide, the kit provides ample tape to dress both wheels on most motorcycles.
The reflective white finish improves rider conspicuity in low-light and night-time conditions, making it a practical as well as cosmetic upgrade. Keiti's wheel stripe kits are a popular choice among riders looking for a cost-effective way to personalise their bike and enhance roadside visibility.
- 6 metres of tape per kit — sufficient for most motorcycle wheel configurations
- 7mm width suits standard wheel rim channels and spokes
- Reflective white finish improves visibility in low-light and night riding conditions
- Self-adhesive backing for direct application to clean wheel rims
- Compatible with a wide range of motorcycle wheel diameters and profiles
| Brand | Keiti |
|---|---|
| SKU | 88-KWS-801 |
| Total Length | 6 m |
| Width | 7 mm |
| Colourway | White |
| Type | Reflective self-adhesive wheel stripe |
- Thoroughly clean the wheel rim surface before application — remove all grease, wax, road grime and old adhesive residue.
- Ensure the rim is completely dry before applying the tape; moisture under the adhesive will reduce bond strength.
- In cold weather (below approximately 15°C), gently warm the tape with a hair dryer to improve flexibility and adhesion.
- Begin application at the valve stem and work around the rim steadily, pressing the tape firmly into place as you go to avoid air bubbles.
- Use a soft cloth or squeegee to press along the full length of the applied stripe and ensure full contact with the rim surface.
- Allow the adhesive to cure for at least 24 hours before riding in wet conditions or washing the wheels.
- Clean the stripe with mild soapy water and a soft cloth; avoid petroleum-based solvents, acetone or abrasive cleaners, which will damage the reflective surface.
- Do not direct a high-pressure washer jet at the edges of the stripe, as this can lift the adhesive over time.
- Inspect the stripe periodically for lifting edges, particularly around the valve stem area, and press down any loose sections promptly.
- Choosing a selection results in a full page refresh.