GIVI to Mount PL351/PLX360 WOUT Monoracks

The Givi 351KIT is a bike-specific hardware kit that lets you fit Givi PL351, PLX351, PL360 or PLX360 pannier holders to a Yamaha FZ6 without running a Monorack top case rack. Normally the side racks pick up a rearward mounting point from the top case rack; this kit supplies that anchor point on its own.

It suits riders who want side cases only — panniers for touring or commuting luggage, with the tail of the bike left clean and free of a top box carrier. As with all Givi mounting kits, it is model-specific and is designed to bolt to the bike's existing hard points.

Sold as a fitting kit only. The pannier holders and cases are purchased separately.

• Allows Givi side case racks to be fitted without a Monorack top case rack
• Provides the rearward mounting point normally supplied by a top case rack
• Compatible with Givi PL351, PLX351, PL360 and PLX360 pannier holders
• Bike-specific fitment for Yamaha FZ6 / FZ6 600 Fazer 2004-2006
• Also fits Yamaha FZ6 S2 / FZ6 600 Fazer S2 2007-2011
• Keeps the rear of the bike uncluttered when running panniers only

Confirm your model and year before fitting — Givi mounting kits are bike-specific and will not transfer between models.
Fit the kit together with the matching Givi pannier holder (PL351, PLX351, PL360 or PLX360); the kit is not a standalone rack and does not include cases.
Follow the fitting instructions supplied with the kit and the pannier holder, working to the bike manufacturer's specifications for any standard bolts you remove and reuse.
Check that all fasteners are seated and tightened evenly before the first ride, and re-check them after the first ride or two while everything settles.
Inspect the mounting points and hardware periodically, especially before and after longer trips or when carrying heavier loads.
Rinse off road salt, mud and grime and dry the hardware to help prevent corrosion, particularly if the bike is ridden in wet or coastal conditions.
Replace any bolt that shows damaged threads, rounding or corrosion rather than reusing it.
Do not exceed the load rating of the pannier holders or cases you are using, and load both sides as evenly as practical.