WMP Globe 6V 3W Instr Capless T10 (Wb117) (Packet Of 10)

A comprehensive range of electrical bulbs designed to provide reliable lighting performance across a wide range of motorcycle applications.

• Voltage: 6V
• Power: 3W
• Application: Instrument lighting
• Type: Capless T10
• Part number: WB117

Available across a range of motorcycle lighting applications, including instrument, flasher, stop/tail, pre-focus and halogen headlamp bulbs.

Note: These bulbs are supplied as a pack of 10. Purchasing a quantity of 1 will result in a purchase of 1 packet of 10 bulbs.

• 6V operating voltage — suited to 6-volt electrical systems
• 3W rated wattage for instrument and dashboard applications
• Capless T10 form factor for direct socket fitment without tools
• Part number WB117 for straightforward cross-reference ordering
• Pack of 10 globes — economical for workshop or fleet use

• 10 × WMP 6V 3W Capless T10 Instrument Globes (WB117)

Ensure the ignition and all electrical circuits are switched off before removing or installing globes.
Avoid touching the glass envelope with bare fingers — skin oils can create thermal stress points; handle by the base or use a clean cloth.
Confirm your vehicle runs a 6-volt electrical system before fitting; fitting a 6V globe to a 12V system will cause immediate failure.
Insert the T10 capless base straight into the socket and press firmly until seated; no rotation is required.
If a replacement globe fails quickly, inspect the socket for corrosion, poor earthing, or voltage irregularities before fitting another.
Store unused globes in their original packaging in a cool, dry location to prevent moisture ingress and glass degradation.
Dispose of failed globes safely — do not crush, as the glass envelope may be under vacuum.