Name: Dririder Nordic V Jacket - GRY / LIME
Brand: DriRider
SKU: 2122920
Price: 335.0 AUD
Availability: InStock

The DriRider Nordic V is a leather and textile sports touring jacket built for riders who cover distance in changeable weather. It pairs a 600D ripstop shell with cowhide matte leather panels in the high-wear areas, over a Texland Reissa waterproof and breathable membrane, so it handles wet commutes and long highway stints without needing a separate rain shell.

A detachable 100g insulated thermal liner lets you run the jacket year-round, while the ventilation system, action stretch panels and arm, hip and waist adjusters keep it comfortable and close-fitting on the bike. CE armour and a high-density foam back pad handle the protective side, and the grey/lime colourway with reflective print helps you stay visible after dark.

Suits sports touring, commuting and general road riding.

Outer shell in 600D ripstop textile with cowhide matte leather panels
Texland Reissa waterproof and breathable membrane rated 8,000mm / 7,000mm
Detachable 100g insulated thermal liner for cold-weather riding
CE armour with high-density foam back pad
Safety stitching and heavy-duty max zippers
Ventilation system for warm-weather airflow
Action stretch panels at the shoulders and elbows
Comfort stretch on the inner arms
Dual rain gusset behind the main zip
Mesh comfort lining
Soft collar and cuffs with neoprene edging
Arm, hip and waist adjusters for a tailored fit
Three external pockets and two internal pockets
Reflective print for night-time visibility
Waist connection zip to join to matching riding pants

DriRider Nordic V jacket
Detachable 100g insulated thermal liner
CE armour with high-density foam back pad (fitted)

Brand	DriRider
Model	Nordic V
Type	Leather/textile sports touring jacket
Outer shell	600D ripstop textile with cowhide matte leather
Membrane	Texland Reissa waterproof and breathable, 8,000mm / 7,000mm
Thermal liner	Detachable 100g insulated liner
Lining	Mesh comfort lining
Protection	CE armour with high-density foam back pad
Pockets	3 external, 2 internal
Adjustment	Arm, hip and waist adjusters
Visibility	Reflective print
Pant connection	Waist connection zip
Colourway	Grey/Lime
SKU	2122924

Remove the detachable thermal liner and take out the CE armour and back pad before any cleaning.
Spot clean the outer shell with a soft cloth or sponge, mild soap and cool water; rinse the cloth often and avoid soaking the garment.
Do not use solvents, petrol, bleach or strong detergents, and do not dry clean — these can damage the leather panels, the Reissa membrane and the reflective print.
Drip or hang dry on a wide hanger at room temperature, away from direct sunlight, heaters and exhausts; never tumble dry.
Keep the cowhide leather panels supple by wiping off road grime and applying a leather conditioner suited to garment leather; the leather will soften and mould to you over the first few rides.
Wash the thermal liner separately and dry it fully before refitting, so moisture isn't trapped in the shell.
Close the vents and make sure the main zip and its dual rain gusset are fully done up before riding in the wet; open the vents in warm weather for airflow.
Check before each ride that the shoulder, elbow and back armour sit correctly over the joints and re-set the arm, hip and waist adjusters for a snug fit — armour only works when it stays in place.
Run the zips clean of grit and lubricate them occasionally with a zip wax or silicone stick so the main and pocket zips stay smooth.
Store the jacket on a broad hanger in a cool, dry, well-ventilated spot rather than folded or in a sealed bag, and never put it away damp.
Inspect stitching, zips and armour pockets periodically for wear, and replace armour after any crash impact.
Always follow the care label sewn into the garment if it differs from the above.