Arisun ATV Tube 20x7-8 TR6

The Arisun ATV Inner Tube in size 20x7-8 with TR6 valve stem is a direct-fit replacement tube for compatible ATV tyres. It suits riders looking to restore or maintain their quad's tyres without replacing the full assembly.

Sized at 20x7-8, this tube is designed to match ATV fitments running an 8-inch rim with a 20x7 tyre profile. The TR6 straight metal valve stem is a widely used standard valve type on ATVs and provides straightforward inflation compatibility with common pumps and gauges.

• Size 20x7-8 suits compatible ATV tyre and rim combinations
• TR6 straight metal valve stem for standard inflation compatibility
• Direct replacement inner tube for ATV applications
• 8-inch rim fitment

• 1 x ATV inner tube

Inflate to the tyre pressure specified by your ATV manufacturer — do not exceed the maximum rated pressure for your tyre.
Apply tyre mounting lubricant (soap solution or dedicated tyre lube) to the tube and tyre bead before installation to prevent tearing during fitment.
Ensure the tube is not twisted or pinched between the tyre and rim when seating the tyre — a pinched tube will fail quickly under load.
Inspect the inside of the tyre for embedded debris, sharp edges, or damage before fitting a new tube, as these will cause repeat punctures.
After fitting, inflate the tube partially, check alignment, then inflate to the correct pressure.
Store unused tubes in a cool, dry location away from direct sunlight, ozone sources (such as electric motors), and petroleum products, which degrade rubber over time.
Inspect valve stem condition regularly; replace the valve core if you notice slow air loss from the stem.
If repairing a puncture, use a tube repair kit suitable for ATV inner tubes and follow the patch manufacturer's instructions for surface preparation and cure time.