AGV Visor SP1 K6 / K6S MPLK Iridium Silver

The AGV Visor SP1 K6 / K6 S MPLK is a direct-fit replacement visor for the AGV K6 and K6 S helmet range. Constructed from 100% polycarbonate up to 4.3mm thick, it achieves Optical Class 1 quality with a wide 190° horizontal and 85° vertical field of view for minimal visual distortion across the full arc of vision.

The iridium silver mirror finish reduces glare in bright conditions, making it well suited to daytime track sessions and sunny open-road riding. Retention pins for a Max Pinlock 120 anti-fog insert are built in — the Pinlock lens itself is sold separately.

• Fits AGV K6 and K6 S helmets only — not compatible with other AGV models
• Optical Class 1 construction for maximum clarity and minimum distortion
• 190° horizontal and 85° vertical field of view
• 100% polycarbonate shell up to 4.3mm thick for high impact resistance
• Iridium silver mirror finish for glare reduction in bright daylight conditions
• Max Pinlock 120 ready — inner pins accept the Pinlock anti-fog insert (sold separately)
• Anti-scratch coating for long-term durability
• UV protective
• One size fits all — single size fits both K6 and K6 S shells
• Daytime use only — not suitable for low-light or night riding

• AGV K6 / K6 S Iridium Silver visor

Clean with warm water and mild soap; use a soft microfibre cloth to gently wipe dry — never dry-wipe a dirty visor as grit will scratch the coating.
Avoid petroleum-based solvents, harsh detergents, abrasive cloths, or household glass cleaners, which can degrade the anti-scratch coating and damage the iridium mirror layer.
When cleaning the exterior, use only light pressure — the iridium mirror coating sits on the outer surface and can be peeled or marred by scrubbing.
For anti-fog performance in humid or cool conditions, fit a compatible Max Pinlock 120 insert (sold separately) into the visor's retention pins before riding.
This visor is designed for daytime use only — the mirror tint reduces light transmission significantly and must not be used in low-light, overcast, or night conditions.
When the visor is not fitted to the helmet, store it in a soft visor bag or cloth pouch to protect the outer coating from contact scratches.
Inspect the visor before every ride for cracks, deep scratches, crazing, or delamination of the mirror coating; retire and replace immediately if any structural damage is found.
To swap the visor, use the quick-release mechanism on the AGV K6 / K6 S helmet; consult the helmet's user manual for the correct removal and refitting procedure to avoid straining the retention tabs.