240/45 ZR 17 (82W) Power 6

The Michelin Power 6 is a sports road tyre built for riders who want genuine sporty performance without giving up everyday mileage. This listing covers the 240/45 ZR 17 (82W) rear size, suited to wide-rear sports and power cruiser machines.

Michelin draws on its motorsport experience to deliver confident grip in both wet and dry conditions, with a construction that places a harder rubber beneath the softer shoulder compound for added rigidity at lean angle. The result is stable, predictable cornering under hard acceleration and braking, and handling that stays precise on twisty roads and longer rides alike.

Supplied as a single tyre. Product images are for illustration only.

• Sports road tyre aimed at riders wanting sporty performance with everyday mileage
• Optimised grip in both wet and dry conditions
• Harder rubber layer beneath the softer shoulder compound for added rigidity at lean
• Improved stability when cornering under strong acceleration or heavy braking
• Precise, agile handling developed from Michelin's motorsport experience
• Radial construction (ZR) rated to a W speed symbol
• Rear fitment in 240/45 ZR 17 with an 82 load index
• Tread pattern geometry that modulates contrast for a shaded grey surface appearance

• One Michelin Power 6 240/45 ZR 17 (82W) rear tyre (single tyre, not a pair)

Have the tyre fitted and balanced by a qualified motorcycle tyre technician using the correct equipment — do not attempt home fitment.
Check that the size, load index (82) and speed symbol (W) meet or exceed the requirements listed in your motorcycle's owner's manual or tyre placard before fitting.
Observe the rotation direction arrow moulded on the sidewall when fitting.
Allow a gentle run-in period on a new tyre, gradually increasing lean angle and pace until the release agents and moulding surface have scrubbed in.
Check and adjust pressures when the tyre is cold, using the pressures specified by your motorcycle manufacturer; re-check regularly, as pressure is lost naturally over time.
Re-check the pressure and wheel balance shortly after fitting and again after the first few rides.
Inspect regularly for cuts, embedded objects, bulges, uneven wear and sidewall damage, and have any damage assessed before riding.
Replace the tyre before it reaches the Australian legal minimum tread depth of 1.5 mm, or sooner if wear indicators are reached.
Do not exceed the tyre's load or speed rating, and avoid overloading the motorcycle.
Clean with mild soap and water only; keep petrol, solvents, brake fluid and tyre dressings off the tread and sidewalls, as they can degrade the rubber and reduce grip.
Store unfitted tyres upright in a cool, dry place away from direct sunlight, ozone sources such as electric motors, and chemicals.