Fuel your savings with exclusive deals.
Rev up your inbox with weekly deals, clearance steals, and promo codes.
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Online store run by Xpert Moto
Local pickup available for pre-orders only
On-site installation at our Lewisham workshop
Call us at: 0433 880 748
Free shipping over $200 (excludes tyres and bulky items)
Need help? book@xpertmotogear.com.au
The Forerunner Knight is an all-terrain ATV tyre built for riders who don't get to choose the ground they cover. Its zig-zag block tread pattern is designed to bite into mixed and soft ground, mud, sand and rock, making it a sensible one-tyre answer for farm work, trail riding and general property use.
This listing is the 25x8-12 size in a 6-ply rating with bias construction and a deep 20mm tread, suited to 12-inch ATV rims. The Knight is also offered in other sizes across the range, including 25x10-12 and 26x9-12.
Fit and pressures should always follow your ATV manufacturer's recommendations and the markings on the tyre sidewall.
- Versatile zig-zag block tread pattern for grip across mixed surfaces
- Suited to soft ground, mud, sand and rock
- 20mm tread depth
- 6-ply rating (6PR)
- Bias-ply construction
- 25x8-12 size for 12-inch ATV rims
- Part of the Knight range, which also includes 25x10-12 and 26x9-12
| Brand | Forerunner |
|---|---|
| Model | Knight |
| Type | ATV / UTV all-terrain tyre |
| Tyre Size | 25x8-12 |
| Overall Height | 25 inch |
| Section Width | 8 inch |
| Rim Diameter | 12 inch |
| Ply Rating | 6PR (6 ply) |
| Construction | Bias |
| Tread Depth | 20mm |
| Tread Pattern | Zig-zag block |
| Terrain | Mixed and soft ground, mud, sand, rock |
| Other Sizes in Range | 25x10-12, 26x9-12 |
| SKU | 12X25X8KNIGHT |
| Barcode | 9420060977936 |
- Have the tyre fitted and inflated by a qualified tyre technician using the correct bead-seating procedure; ATV tyres can be damaged by over-inflation during fitting.
- Set and check cold inflation pressures against your ATV manufacturer's recommendation, and never exceed the maximum pressure or load moulded on the sidewall.
- Check pressures before each ride when cold — low-pressure ATV tyres lose air noticeably over time and uneven pressures left to right affect handling.
- Fit tyres in matched sizes and comparable wear across an axle, and check the sidewall for any rotation direction marking before mounting.
- Take it easy for the first ride on new tyres to scrub off the release agent and let the tread blocks bed in.
- After riding in mud, sand or salt, hose the tyre and rim off with water and a soft brush; avoid petrol, solvents and silicone tyre shines, which can degrade the rubber.
- Inspect regularly for cuts, punctures, stones lodged between the tread blocks, sidewall bulges or exposed cords, and replace the tyre if any are found.
- Retorque wheel nuts after the first ride following fitting and check them periodically.
- Store spare tyres upright in a cool, dry place out of direct sunlight and away from electric motors, ozone sources, fuels and oils.
- Replace the tyre once the tread is worn down, damaged or the rubber has hardened and cracked with age.
- Choosing a selection results in a full page refresh.