Fork and shock service

The Whites Showa BPF Fork Cap Removal Tool is designed to remove and install 8-point 45mm fork caps found on 43mm Showa big piston forks. Constructed from lightweight aluminium the tool prevents marring and damage to your expensive fork caps, with a knurled edge...

Rizoma Hand Wheel Shock Adjuster ZDM095A If you are the type of rider who takes advantage of the fully adjustable suspension you paid good money for, then why not add a shiny billet preload adjuster to make the job a little easier. In addition...

Unit Shock Preload Wrench - Double End (72 mm / 82 mm) SPECIFICATIONS: - Shock Preload spanner wrench make easy to adjust your spring pre load on your suspension.- Wrench size available for common pre load nuts.- Available in different wrenches.

SCP PART#: D59-37-166

Unit 3/8 Drive Shock Wrench - M (72 mm) SPECIFICATIONS: - Spanner wrenches use with 3/8 drive ratchet wrench.- Can be used with torque wrench for secure pre road nut tightening torque.- Available 2 wrench sizes, 72mm and 82mm.

DRC - Suspension Sag Checker Allows you to measure suspension sag by yourself easily. Compact design, it does not take much space in your tool box. Measure front and rear suspension sag easily with this kit. Clamp comes with rubber and will not damage...

SCP PART#: ED59-37-300

Unit Dust Seal Remover SPECIFICATIONS: - Dust seal remover for front fork dust seal remover.- Easily remove dust seal without damaging front fork outer tube.

DRC Shock Spring Compression Tool Twin Shock SPECIFICATIONS: Spring removal tool for twin shock moto.

DRC Shock Reserve Cap Removal Tool - DRC

SCP PART#: D59-37-136

DRC WP Orange/Blue Suspension Bleed Cup Tool - DRC

DRC Front Fork Seal Insert Tool 48mm - DRC

SCP PART#: D59-37-135

Fork Compression Valve Removal Tool SPECIFICATIONS: - Special tool for removing compression valves from KYB and SHOWA Twin chamber type inner cartridge.- SHOWA SFF Air removal tool does not contact air bleed valve.- Available for KTM White Power suspension removal tool.- Can be used...

SCP PART#: D59-35-189

DRC Wrench Pro Gold Fork Cap Tool WP 35mm - DRC

DRC Fork Seal Driver Set 40-50 features:Specially designed frok seal driving tools for front forksIncludes 5 different sized plastic adaptorsCan be used for most conventional and upside-down forksPlastic adaptors won't damage inner fork tubesSteel body with flange designed for accurate operationCovers fork sizes from...

SCP PART#: D59-24-026

DRC SHOWA SFF Fork Compression Valve Tool - DRC

SCP PART#: ED59-37-320

DRC WP 50mm Pro Fork Top Cap Wrench - Orange - DRC

SCP PART#: ED59-37-310

DRC Showa 50mm Pro Fork Top Cap Wrench - Red - DRC

SKU: D59-37-170 FEATURES Aluminium front fork top cap wrench. Allows to disassemble and assemble in one cycle job with a wrench and rod stopper combined tool. The closed design wrench grabs the top cap tightly. Provides a hole to attach a torque wrench for...

SCP PART#: ED59-37-205

SCP PART#: ED59-37-203

A helpful tool to set open spring rear shocks for your Triumph, Norton or BSA motorcycle. It works on Dot shocks with a 1-7/8" diameter adjustment nut.

The Whites Shock Spanner Punch Tool is designed with an extra long shaft that helps you to turn hard to reach lock ring and preload rings on rear shocks. Constructed with an angled brass tip that provides a secure bite and protects the preload/lock...

The Whites Shock Seal Head Tool helps you to easily remove and install the shock seal head assembly. Designed to be simply pushed down without causing damage to the seal head when detaching the circlip of the shock body. Constructed with a knurled edge...

The Whites Shock Preload Adjusting Tool is the perfect tool for adjusting your shock preload on motorcycles or ATVs with an 80mm shock spring collar. Eliminate the risk of damaging your shock and collars with a screwdriver and hammer and use this Whites tool...

The Whites Shock Spanner Wrench provides a quick and easy way to adjust the preload on your ride. Compatible with many road, off-road and ATV single shocks with a 66.5mm and 87.5mm dual head design along with an 8mm notch for a firm hold....

The Whites Shock Bladder Puller is a must-have tool for shock rebuilds. The tool attaches to the shock reservoirs Schrader valve, simplifying the shock cap and bladder removal while preventing damage to the valves threads. Constructed from lightweight 6061-T6 aluminium with a durable red...

The Whites Sock Compression Adjuster Removal Tool allows easy removal of the rear shock compression adjuster on a range of Yamaha YZ motorcycles. Note: The punch marks at the threads must be drilled 1mm deep prior to removal.

The Whites Shock Preload Adjusting Tool is the ideal tool for adjusting the shock preload on your motorcycle or ATV. Designed with a rounded angle tip and long bar the tool fits nicely in to the notched collars for quick and easy preload adjustments....

The Whites Nitrogen Needle Kit is used to fill shocks with self-sealing type rubber valve.

The Whites Adjustable Shock Preload Adjusting Tool is the perfect tool for adjusting your shock preload on motorcycles or ATVs with a 35-75mm shock spring collar. Eliminate the risk of damaging your shock and collars with a screwdriver and hammer and use this Whites...

The Whites Shock Compression Adjuster Removal Tool is for disassembling the shock absorber compression stage adjuster on KYB/Showa (24mm) shocks. It can also be used to disassemble the piston rod on WP shock absorbers (counter nut on the foot).

The Whites Sock Compression Adjuster Removal Tool allows easy removal of the rear shock compression adjuster. Note: The punch marks at the threads must be drilled 1mm deep prior to removal.

The Whites Shock Reservoir Cap Removal Tool threads onto the Schrader Valve located on the reservoir cap helping you to install/remove it easily.

The Whites Nitrogen Needle Kit is used to fill shocks with self-sealing type rubber valve.

The Whites Shock Retaining Clip Tool has a cupped tip to retain clip when digging it out of the gland.

The Whites Shock Seal Head Tool helps you to easily remove and install the shock seal head assembly. Designed to be simply pushed down without causing damage to the seal head when detaching the circlip of the shock body. Constructed with a knurled edge...

The Whites Sock Compression Adjuster Removal Tool allows easy removal of the rear shock compression adjuster. Note: The punch marks at the threads must be drilled 1mm deep prior to removal.

Remove and install your shock bushings the easiest way there is, with the Whites Shock Bushing Driver Set. Including four different sized bushing drivers from 12.5mm to 18mm, this tool set has diverse applications. Simply place the shock bushing over the appropraite hole and...

The Oxford Airflow Shock is a portable shock pump for topping up air pressure on MTB suspension forks and rear shocks, quickly delivering up to 300 psi capacity. Features: Mechanical pressure gauge 6 Inch pivoting hose Precision alloy barrel Pressure release button Max inflation:...

Designed for removing the fork cap on your forks, making fork oil changes a breeze. Constructed from durable steel the Whites Fork Cap Wrench is long lasting and is the essential tool when performing fork maintenance.Wrench for removing front fork capMade of durable steelClosed...